Addition cure Molding Silicone Rubber
Quick Detail
- FOB Price : USD $12.00 / Piece
- Minimum order:200
- Place of Origin:SHENZHEN
Specifications
Addition cure Molding Silicone Rubber
1. Description:
HY E640 is very suitable for making silicone rubber stone molds. It is featured with extremely low shrinkage, good fluidity and resistance to many kinds of chemicals; This material do not release any by-product with low molecular weight during its curing process, and it's cured from top to bottom and from the inside and outside simultaneously, namely, deep curing. The HY-E sereise platinum cured silicone will not have the problem of degradation, sticky mold surface caused by the existence of by-product of small molecules under certain conditions, (such as closed environment, high temperature). Known from our customer's feedback, it is very convenient to make cement molds, and it is a high-quality silicone for construction industries. Further more, it can be applied to make multiple piece molds for products with complex design.
Specification
- Durable
- High tear strength for replication
- Non-shrinkage
- High simulation
- Cover fine details
2. RTV Silicone Rubber for Artificial Stone Molding- Advantage:
HY E640 is also featured with low shrinkage and nearly nil viscosity, good fluidity; Without releasing any by-product with low molecular weight, and it's cured from top to bottom, from the inside and outside simultaneously. It is suitable for the products with medium size or big size.
3. RTV Silicone Rubber for Artificial Stone Molding- Applications:
HY E640 can be used in the field of construction applications. Because the vulcanizing reactions of addition cure silicone is fundamentally different from tin cure silicone’s, it has some characteristics that the condensation cure type do not have, such as adjustable curing rate, being completely environmentally friendly, and so on. Therefore, our platinum cure silicone is particularly applicable for large stones molds, artificial stone molds, plaster and other architecture elements replication. The following is some detailed data about the performance of this model
4. RTV Silicone Rubber for Artificial Stone Molding- of E-640 Standard Datasheet:
| Model | Viscosity (cps) | Hardness (A°) | Tensile strength (Mpa) | Tear strength (KN/m) | Elongation (%) | Mixing ratio (%) | Operating time(H) | Curing time(H) |
| HY-E640 | 30000±8000 | 42±2 | >=4.0 | >=7 | >=200 | 2~3 | 0.5~1 | 2~5 |
If you need more information,pls contact Abbie:
Tel:86-755-89311348
Fax:86-755-89948030
Mob:86-18938867560
Mail:hyab at resinpu dot com
Facebook:HYJCY at SZRL dot net
YouTube:silicone0041 at gmail dot com
QQ:2355542681
