Pressure Locked Steel Bar Grating

Pressure Locked Steel Bar Grating

/

We supply four categories pressure locked bar gratings according to sizes and structures:

1, Ordinary steel grating maximum working height of 100mm. Steel grating length is usually less than 2000mm. Ordinary bearer flat grooving, the rail steel molding pressure lock.

2, Steel grating height of not more than 100mm. Steel grating length is usually less than 2000mm. Integral bearing steel and rail steel having the same height as the bearer flat notch depth 1/2.

3, Sun steel grating, grating height is less than 100mm. Bearing steel open 30 ° or 45 ° chute, slotted rod steel slotted lock molding press. Depending on the distance required to hand over the other specifications of the grid plate, you can use ordinary carbon steel, stainless steel, aluminum and other materials.

4, Heavy-duty grating: high steel and flat steel crossbar bite each other, at 1200 tons of clamping pressure molding. Suitable for high bearing loads span occasion.

Pressure Locked Metal Bar Grating is a system constructed of interlocking slotted bars bonded together using tremendous hydraulic pressue. The bars are positioned every 2 inch or 4 inch. Also known as press-locked bar grates. Permanent locking is achieved by forcing the deep cross bar into the bearing bar. Both the cross bars and the bearing bars provide walking surfaces in the press-locked design.

Pressure locked bar grate panels provide a smooth clean look ideal for architectural applications such as grilles, dividers and screens. It is used in the same structural applications as its welded steel and rectangular aluminum counterparts. Popular metal materials for press locked gratings are Aluminum alloy, Galvanized Steel and Stainless Steel. Stainless Steel and Aluminum Pressure Locked Gratings are mostly used architectural ceiling panels and decoration. Spacings range from 7/16\" to 1-3/16\".