Road Marking Machine YHLJ-S

Model Number: YHLJ-S single/double gun
Engine: Honda 5.5HP gasoline engine
Paint pump: Diaphragm type Working pressure: 10-20Mpa
Spraying flow: 8L/min Spray gun:Double pneumatic spraying guns, single manual spraying gun (optional), automatic gun rack
Spraying width: 100-450mm (adjustable)
Spraying thickness: 0.2-0.4mm (adjustable)
Marking speed: 3-5km/h
Machine weight: 120kg
Dimensions: 600*1200*900mm

Hand-pushed cold paint road marking machine is the common equipment for road marking at room temperature,and is used for straight line, dotted line, induced lines, zebra crossing, text, graphics in the following areas:
City roads- temporary marking or cover the original line
Airports & runways
Side streets
Parking lots
Factory floor & warehouse floor
Sports ground
Railway platform
Bus stops
Underground parking
Gas station
Plants, factories & manufacturing facilities industrial painting
Epoxy floor

1. Add marking hopper oil frequently while heating
2. Marking hopper must be handled with care, avoid collision the alloy blade.
3. To extend the drill life, fire should not be too strong.
4. Pay attention to the wind direction when the wind is strong, to prevent burning rubber

http://www.winfarroad.com/

////