(1) forged grinding media solid steel balls for mining parameters
/
1 > High Hardness: Surface hardness: HRC57-67 HRC, volume hardness HRC56-64.
2 > High Impact Toughness: The impact toughness of our grinding balls is more than 18 J / cm2.
3 > Low Broken Rate: the actual broken rate is not higher than 0.5%.
4 > Good wear-resistant and lower wear rate.
Model Number | Material | C% | Si% | Mn% | P% | S% | Cr% | Ni% | CU% | Mo% | Al% | V% |
Iraeta1 | B2 | 0.76-0.82 | 0.17-0.35 | 0.72-0.80 | <=0.020 | <=0.015 | 0.50-0.60 | <=0.25 | <=0.20 | / | 0.020-0.050 | / |
Iraeta2 | B2-1 | 0.77-0.81 | 0.26-0.34 | 0.72-0.80 | <=0.020 | <=0.015 | 0.32-0.40 | <=0.25 | <=0.20 | / | 0.020-0.050 | / |
Iraeta3 | B3 | 0.61-0.65 | 1.73-1.80 | 0.73-0.80 | <=0.020 | <=0.015 | 0.80-0.88 | <=0.25 | <=0.20 | / | / | / |
Iraeta4 | B3A | 0.60-0.64 | 1.45-1.55 | 0.68-0.76 | <=0.020 | <=0.015 | 0.75-0.85 | <=0.25 | <=0.20 | 0.05-0.09 | / | / |
Iraeta5 | B4 | 0.66-0.74 | 1.2-1.4 | 0.5-0.7 | <=0.020 | <=0.022 | 0.85-0.10 | / | <=0.4 | / | 0.025-0.045 | 0.05-0.15 |
Iraeta6 | B6 | 0.74-0.85 | 0.15-1.35 | 0.90-1.05 | <=0.020 | <=0.020 | 0.88-0.98 | <=0.25 | <=0.25 | 0.06-0.13 | 0.025-0.045 | / |
Iraeta7 | B6-1 | 0.70-0.76 | 0.15-0.35 | 0.90-1.05 | <=0.020 | <=0.020 | 0.88-0.98 | <=0.25 | <=0.25 | 0.06-0.13 | 0.025-0.045 | / |
Iraeta8 | B6A | 0.82-0.90 | 0.15-0.35 | 0.90-1.05 | <=0.020 | <=0.020 | 0.88-0.98 | <=0.25 | <=0.25 | 0.06-0.13 | 0.025-0.045 | / |
Iraeta9 | BU | 0.95-1.05 | 0.15-0.35 | 0.95-1.05 | <=0.025 | <=0.025 | 0.45-0.55 | <=0.0.6 | <=0.06 | <=0.05 | 0.02-0.04 | / |
Iraeta10 | YS901 | 0.77-0.83 | 0.2-0.35 | 0.8-0.9 | <=0.015 | <=0.015 | 0.8-0.9 | <=0.15 | <=0.15 | 0.03-0.08 | 0.02-0.04 | / |
Iraeta11 | S902 | 0.77-0.83 | 0.2-0.35 | 0.9-1.0 | <=0.015 | <=0.015 | 0.9-1.0 | 0.2-0.35 | 0.2-0.35 | 0.12-0.18 | 0.02-0.04 | / |
(2) Expert support selecting ball mill steel balls
1>Choosing the optimal grinding media - we can help you choose the correct media for your application based on ore characteristics and your mill
2> Improved production and energy efficiency - our tools allow us to identify the correct media and mill liner pairing
3> Lower total cost of ownership - the correct media choice coupled with our exact manufacturing maximizes wear life
4> Continuous improvement - our sophisticated monitoring tools coupled with wear performance simulation means we can continue helping optimize production