Cooling tower herringbone fill

Cooling tower herringbone fill is designed with herringbone surface to distribute water evenly over the whole fill area for high thermal performance. This media has specific surface design and moderate anti-fouling tendencies, fabricated from rigid PVC or PP sheets that are solvent welded for maximum strength. HPVC is also available for high temperature conditions. It is used in cross-flow cooling tower applications.

There is one piece of black cooling tower fill on the ground.

We offer different sizes of herringbone fills for cooling tower, and the surface configuration may vary from each other.There is one blue cooling tower herringbone fill on the ground.

Blue cooling tower herringbone fills are also available for some cooling towers.

There are many pieces of herringbone fills piled together on the ground, and you can see the surface configuration clearly.

Cooling tower herringbone fills are just made from the factory, and the herringbone design on the surface contributes to even water distribution.There is one black cooling tower herringbone fill on the ground.

Cooling tower herringbone fill in black is commonly used, and the size shall be made by the cooling tower dimension.

There is one piece of black herringbone fill for cross flow cooling towers.

Apart from herringbone surface design, cross flow herringbone fill has other properties varying from each other according to different cooling towers.The picture shows detail of one cooling tower herringbone fill.

Herringbone surface design makes large quantities of \"w\" shaped flutes, which distributes water evenly over the entire fill area.

Feature

Excellent air & water management for high thermal performance.

Herringbone surface design maximizes heat transfer for even water distribution.

Honeycomb bonded edges on the air inlets and outlets.

Resistant to UV, corrosion, organic/inorganic solvents, acids, alkali, etc.

Various sizes and sheet spacing for choice.

Easy installation and maintenance.

Specification

Material: PP, PVC, HPVC.

Surface area: 167.4 m2/m3.

Sheet spacing: 19 mm.

Media pack sizes:

Depth: 305-610 mm.

Width: 153-305 mm.

Length: 610-3658 mm.

Application

Cooling tower herringbone fills are suitable for cross flow towers, mainly in air-conditioning cooling water system, iron and steel industry, paper making, pharmacy, etc.