STAIN-RESISTANT IMPREGNATING FOR INTERIORS

STAIN-RESISTANT IMPREGNATING FOR INTERIORS

COMPOSITION

Alkylalkoxysilanes, fluoropolymers, resin-wax emulsions, paraffin wax, Carnauba wax, beeswax, antifouling agent, essences, water.

PROFILE

LINFOCOT is a special formulation with unique characteristics, with the ability to protect surfaces, maintaining breathability virtually unchanged (vapour permeability), preserving the hygroscopic characteristics of the brick itself, while preventing dirt, grease, cola, coffee etc... to penetrate and therefore stain the floor.

IMPORTANT: for regular cleaning, do not use alcohols, or acid, solvent or ammonia based-detergents.

INTENDED USE

LINFOCOT protects indoor surfaces made of concrete, cotto tiles and unpolished natural stone, giving them hydro-oil-repellent properties superior to any other product.

INSTRUCTIONS

Shake well before use. Always use at temperatures above +10°C. After cleaning the floor thoroughly and after waiting for it to dry (3-12 days at 20°C) apply directly or over primer (e.g.: FOLLET C, KRIPTON-HS, OLIO DODICI,) 1-3 coats of LINFOCOT (depending on the porosity of the material to be treated) at intervals of approximately 1-2 hours between applications. On compact surfaces it is recommended to dilute the product with demineralised water. To apply the product it is recommended to use a cotton cloth and brush, fleece or applicator. After 1-2 hours from the last coat of LINFOCOT, apply a coat of Sintesi 3/P finishing product (blend of hard waxes). LINFOCOT applied directly gives a hint of colour to the surfaces. Always run some test applications before applying it to the definitive surfaces.

PROS

• Excellent water and oil resistant properties.

• Ensures normal breathability.

• Fast application.

• Even result.

• It does not release harmful substances during application or after.

• High yield

• Solvent-free.

• Pleasantly scented.

PROPERTIES

DILUTION: Ready for use.

DRYING/WALKABLE: after 2 hours.

TIME OF REACTION: 48 hours.

YIELD: Approximately 12/18 sqm/l per coat.

HOW TO CLEAN EQUIPMENT: Wash with water.

STORAGE: Closed in the original packaging, in a cool place, away from frost and UV rays, it retains its properties for at least one year.

PACKAGING:

12 1-litre bottles

4 5-litre buckets

2 10-litre buckets

CHARACTERISTICS

APPEARANCE: liquid

COLOUR: milky

ODOUR: aromatic

SOLUBILITY IN WATER: total

ACTIVE INGREDIENTS: 20%

PH (20°C): 8.1

SPECIFIC WEIGHT (20°C): 1.012 kg/l.

HEALTH

The product is not classified as hazardous pursuant to the provisions set forth in EC Regulation 1272/2008 (CLP) (and subsequent amendments and supplements).

No danger symbol is required on the label It must nevertheless be kept out of the reach of children and must not be disposed of in drain water, in order to protect the environment. We nevertheless advise you to adopt good work practices.