API brass/steel angle valve china manufacturer,cast iron angle valve flange type
Quick Detail
- Minimum order:1
Specifications
Specifications
1. Brass body & cartridge(Cu57Pb3), zinc alloy handle, polishing, chrome plated.
2. CE, ISO9000.
Technical Requirement:
1. Before assembling, all parts should be clean, no oil or grease. Remove all burrs and sharp edges.
2. Before connecting, body cap male thread should be coated with sealing glue.
3. Handle turn or close freely.
4. After assembling, test by water at pressure no less than 0.8Mpa, no leakage.
Other details:
Handle: ABS with chrome coated
Cartridge: Brass quick open
O-ring: NBR
Nut: Brass with polishing&chrome
Ring: Brass
Body: Forged brass with Polishing&Chrome
Decoration disc: Stainless steel
Connection: Male
Size: 1/2\"x3/8\" ; 1/2\"x1/2\"
Remark:
Brass Grade: 57-3 ( Cu>57%, Pb<3%)
No obvious spots, scratches on surface.
