188 mm top quality Turbo wet stone cut diamond circular saw blade

Usage:

Concrete, Light Weight Blocks,Bricks, Stone, and Masonry Materials,Asphalt,etc.

Apply Machinery & Use Method:

Angle grinder, circular saw, masonry saw, table saw,,Wet and Dry Cutting

/

Pay Attention:

a.Before use you should confirm the saw blade is unbroken in the transport, if it is damaged, prohibited use. Assembly, the motor shaft and the blade center hole with the error must be less than 0.1mm.

b.CAUTION Keep the direction of the arrow marked on the blade in the same direction as the direction of rotation of the power tool. When cutting, do not apply side pressure and curve cutting, feed to be slowly and smooth, to avoid the impact of the blade contact with the workpiece, so as to avoid danger.

c.According to the type of cutting disc dry, wet cutting, dry cutting, do not carry out long continuous cutting, so as not to affect the life of the saw blade and cutting effect; wet film cutting, must be water cooling, guard against leakage.

d.Saw installed, it should first idle for a few minutes to confirm no swing or beating, the first wheel in the wheel or firebrick try cutting brick, and then the normal work of the best results. If the sharpness of the blade is not enough, please use the silicon carbide grinding stone.

e.Cutting machine to have security shield, the operator must wear safety clothing, glasses, masks and other protective equipment.