OEM RCKW Series Disk Tailing Recovery Machine from China For sale

Introduction

RCKW permanent magnet disc tailings recovery machine is composed of main engine, unloading device, collecting trough, chute and rack. Its working principle is the host disk in a chute, slurry flow from one end of the chute, and through the gaps in the disk and disk, magnetic minerals in the pulp was adsorbed on the surface of disk, the remaining non-magnetic minerals of pulp from chute at the other end. Hosting the stone plate rotation, magnetic mineral adsorption in the disk surface is out of the mine slurry surface, when to enter the discharge within the mining area, the unloading device inserted into the gap between the disk and the rotation will be magnetic surface adsorption of magnetic minerals into set trough, trough to collect the output by set.

Feature

1. High handling capacity, high recovery rate and low water consumption.

The magnetic field depth of the disk is made up due to the composite magnetic system, which is composed of polymagnetic and other technologies. The field is high and the gradient is large. Compared with other similar products, the recycling amount is 2-3 times.

2. The unloading is easy and the magnetic block is not worn.

Using mobile magnetic field technology, filling type suction in the water under the action of momentum, with the help of a mobile magnetic field magnetic, kuangfen automatic gathering near the disk outside edge, due to the outside along the disk for the same poles (N and S), in accordance with the principle of magnetic field with poles repel, scraper is easy to be scraped off and leaving a protective layer on the magnetic surface.

3. Simple structure and small energy consumption

Using common cycloidal reducer, without complex speed regulation system and complex induction plate discharging device, energy saving 5% 25% than similar products, optimize the mechanical structure, overcome the discharging from the top on the disk and disk looseness, caused by shaft etc. In the operation of the equipment, no mechanical failure is considered in addition to the timing of lubricating oil and the replacement of the rubber sheet.

4. Long service life

Due to the use of nd-b as a magnetic source, the machine has overcome the disadvantages of non-corrosion resistance, high temperature, oxidation and fast attenuation. After careful development of our scientific research staff, repeated trials have been conducted successfully to protect the strong magnets, which can significantly prolong the service life.

Packaging & Delivery
Packaging Details:
Pack each window with aluminum foil band and PVC film to protect against scratches.
2. Use wood pallet and frames to fix the windows to avoid collision or shaking.
3. Use packing strap to fasten the pallets.
4. Load the pallets with forklifts. Put airbags between pallets to avoid collision.
Delivery Detail:
Shipped in 30 days after payment

Contact Us:Rechal@baitecidian.com