replacement filters are available for your previously purchased drinking water or whole house filtration system. Each filter identifies the corresponding system to which it belongs, and most are simple to replace, usually just a 1/4 turn to the left to remove and to the right to replace.
Sediment Water Filter Cartridge
10” pp sediment filter usually use the first stage for the home ro water filter. It removes Heavy Sediment , Rust, Dirt , Particles and impurities from the water.
Model NO: PP04
Size: 10 inch*2.5”
Material:Spun Polypropylene
CAN BE INSERTED INSIDE ANY STANDARD 10" HOUSING AND USED AS A SEDIMENT PARTICLE PROTECTION FILTER
(we also have the housings if required , simply send us a message)
Description:
· Inserted inside a standard universal 10" housing pod. (housings also available)
· Used for all types of sediment filtration , very popularly used as stage 1 filtration (or 2 if using a 5micron prior to it)
· This is a 1micron spun cartridge (the lower the micron rating, the finer the sediment removal , therefore use either on its own as stage 1 or alone OR if using a series of these filters then start with the highest micron rating in stage 1 of the filtering and then go down to a lower micron rating. Continue going to a lower micron as you require.
· Used to filter hard well water (on many occasions before a water softener or water treatment System) , or filtration protection prior to an Aquarium or water feature were sediment filtration is required.
(Also used on some reverse osmosis systems)
Specification:
· Material: Spun Polypropylene
· Core: Polypropylene
· Max.Pressure 6bar
· Max. Temperature 80degreeCelsius / 176F
· Micron Rating 1micron
· Dimensions Approx. 10"x2.5"