SC(B) Type 10kv Series Resin Insultation Dry-Type Transformer

General introduction of SGB10 Cast Resin Transformer:

epoxy encapsulated transformer is well applied in power plant substation with low voltage device, high voltage device, transformer, and other components integrated, greatly recognized by its functional and energy saving properties. It is safe, non-pollute, and flameproof which can be installed directly on the load center with the merits of free maintenance, easy installation, low combined operation cost, low loss and excellent humidity resistance.

Product specification of SGB10 Cast Resin Transformer:

Service condition:

The height above the sea level is below 1000m.

Ambient temperature:

Highest air temperature +40ºC

Highest daily average air temperature +30ºC

Highest annual average air temperature+20v

Lowest outdoor air temperature-25ºC

The scope of application:

Applies to high fireproofing, load fluctuating, unventilated, incommodious, dirty and moist environment such as power plant field, subway, metallurgy, hospital, high-rise building, shopping center, crowded resident zone, and the special environment such as petrol-land chemical industry, nuclear power station, a nuclear submarine.

Product features(advantages )of SGB10 Cast Resin Transformer:

A.Good heat emission, big overload capacity. Can work without wind machine for a long time under 130 overloads, and be full load without compulsive wind cool without capacity descending under IP45 condition.

B.Perfect safe and resistance to fire operating can be combusting for long period under 800ºC and without smoke

C.Strong resistance to thermal shock(can be full load immediately at -50ºC)

D.Complete waterproof and airproof.

E.No partial discharge

F. Good hydrophobicity and good resistance to alkaline cauterization and fundal influence

G. Environmental, low noise, no deleterious gas, easy to decomposition.

Product Certification of SGB10 Cast Resin Transformer:

/

Deliver and shippment of SGB10 Cast Resin Transformer:

Sea transportation. 1 set Transformer per wooden carton.

Production process of SGB10 Cast Resin Transformer:

/

//