Iron Bending Machine

SHANGHAI DAVIS INDUSTRY MANUFACTURE GROUP CO.,LTD, it is a comprehensive high-tech enterprise which integrates the building, production and sales of the iron bending machine. Our factory mainly has advanced machines to research and design the iron bending machines, we can meet the demand of different customers and achieve the balance between the quality and price of the iron bending machine.

Introduction to the Operation of the Iron Bending Machine:

1. The Angle slot of the iron sheet bending machine is selected, and the plate thickness is roughly 8 times the width of the slot. If the sheet that bends 4 mm, need to choose the slot of 32 or so.
2. The adjustment of the backstop of the iron bending machine usually has two modes: electric quick adjustment and manual adjustment.
3. Step down the pedal switch and start bending. The CNC bending machine is different from the cutting machine. It can be released at any time, loosen the foot and stop, and continue to descend.
4. The first is to turn on the power of the iron bending machine, turn on the switch on the control panel, then start the oil jet, and you can hear the sound of the pump assembly. (the equipment does not move)
5. Adjust the stroke of theiron bending machine. When used, we should pay attention to the adjustment of the stroke, and do not need to test before bending. It must be ensured that there is a thick gap between the top and bottom. Otherwise, the die equipment will be damaged. The adjustment of stroke also has electric quick adjustment.