Laser Cutting Machine
Quick Detail
- Minimum order:1
Specifications
Laser Cutting Machine
The laser has applications in teaching, military, and industry. The laser cutting machine is one of its applications. Laser cutting machines are used in both metal and nonmetal cutting. The
use of laser beams to melt the surface of materialsLaser cutting machine is one of the most popular laser processing equipment. Laser cutting consists of laser vaporization cutting,
laser fusion cutting, laser oxygen cutting, laser scribing and control fracture.The energy released by a laser beam when the laser beam irradiates the surface of the sheet metal. The
metal plate is melted and blown away by the gas. Since the laser force is very concentrated, only a small amount of heat is passed to other parts of the sheet metal, resulting in little or no
deformation. The laser can be used to cut the blanks of complex shapes very accurately, and the blanks need not be further treated.The laser source uses a CO2 laser beam with a
working power of 500~5000 watts. This power level is lower than the power required for many household electric heaters because the laser beam is concentrated in very small areas due to the use of
lenses and mirrors. The energy concentration is high enough to allow rapid local heating to melt the sheet metal.Laser cutting equipment can be used to cut stainless steel below
16mm. In the laser beam, oxygen can be cut from 8 to 10mm stainless steel, but after oxygen cutting, a thin oxide film will be formed on the cutting surface. The maximum thickness of the cutting
can be increased to 16mm, but the size of the cutting parts is larger.
GEM Laser cutting machine is including the followed products but not only
1. Fiber laser cutting
2. YAG laser cutting machine
3. Vision laser cutting machine
webiste:http://www.gem-lasers.com/laser-products/laser-cutting-machine/
company:GEM LASER LIMITED
contact:86-27-84793136
email:sales@gem-lasers.com
