TS418-1N426 Thermopile Infrared Sensor for NDIR CO2 Gas Detection

  • Minimum order:1
  • Place of Origin:United States
  • Brand Name:TE

TS418-1N426 Thermopile Infrared SensorCIFICATIONS
• Thermopile IR-Sensor
• Filter for NDIR CO2 Gas Detection
• Single Element
• Very High Signal
• Flat Filter
• Small Package
• Accurate Reference Sensor

TS418-1N426 Thermopile Infrared Sensor DESCRIPTION
Thermopiles are mainly used for contactless temperature or non-dispersive infrared measurement in many applications. Their function is to transfer the heat radiation emitted from the objects or other infrared sources into a voltage output.

TS418-1N426 Thermopile Infrared Sensor FEATURES
• Very High Signal
• Accurate Reference Sensor
• 4.26µm Narrow Band Pass
• Small TO-18 package

TS418-1N426 Thermopile Infrared Sensor APPLICATIONS
• NDIR CO2 Gas Detection

TS418-1N426 Thermopile Infrared Sensor ABSOLUTE MAXIMUM RATINGS

Parameter Symbol Min Typical Max Unit Description
Storage Temperature Ts -20 +20 +85 °C permanent
Storage Temperature Ts -20 +20 +100 °C non permanent

TS418-1N426 Thermopile Infrared Sensor PERFORMANCE SPECS
Parameter Symbol Value Unit Condition
Operating Ambient Temperature TAmb -20 to +85 °C permanent
Operating Ambient Temperature TAmb -20 to +100 °C non permanent
Package
TO-18

Absorber Area A 1.4 x 1.4 mm2
Thermopile Resistance RTP 180 ± 60 TAmb = +25°C
Temperature Coefficient

of Thermopile Resistance

TCRTP -0.06 ± 0.04 %/K TAmb = +25°C to +75°C
Voltage Response
VTP
depends on
light source
mV
TAmb = +25°C, TObj = +100°C,
DC, totally filled field of vie
Temperature Coefficient

of Voltage Response

TCVTP -0.45 ± 0.08 %/K TAmb = +25°C to +75°C
Noise Equivalent Voltage NEV 130 nV/Hz½ TAmb = +25°C
Rise Time t63 22 ± 5 ms
Ambient Temperature Sensor
Ni-RTD

Ambient Temperature Sensor Resistance RNi-RTD 1000 ± 4 Ω TAmb = 0°C
Temperature Coefficient of Ni-RTD TCNi-RTD 6178 ±150 ppm/K TAmb = 0°C to +100°C

ISweek company

Tel: 86-755-83289036 Fax: 86-755-83289052 Country: Hong Kong