Silicone Rubber For Architectural Decorations mold

Place of Origin:China
FOB Price : USD $12.80 / Piece
Minimum order:50

1,Silicone Rubber For Architectural Decorations mold

Silicone Rubber For Architectural Decorations mold is very suitable for making silicon stone mold.

It is featured with extremely low shrinkage, good fluidity and resistance to many

kinds of chemicals; This material do not release any by-product with low molecular weight during its curing process, and it\'s cured from top to bottom and from the inside and outside simultaneously, namely, deep curing. The E sereise platinum cured

silicone will not have the problem of degradation, sticky mold surface caused by the existence of by-product of small molecules under certain conditions, (such as closed

environment, high temperature). Known from our customer\'s feedback, it is very

convenient to make cement molds, and it is a high-quality silicone for construction industries. Further more, it can be applied to make multiple piece molds for products with complex design.

2,Advantage of Silicone Rubber For Architectural Decorations mold

Silicone Rubber For Architectural Decorations mold

is also featured with low shrinkage and nearly nil viscosity, good fluidity; Without releasing any by-product with low molecular weight, and it\'s cured from top to bottom, from the inside and outside simultaneously. It is suitable for the products with medium size or big size.

3,Applications of Addition Silicone Rubber For Architectural Decorations mold

Silicone Rubber For Architectural Decorations mold

can be used in the field of construction applications. Because the vulcanizing reactions of addition cure silicone is fundamentally different from tin cure silicone’s, it has some characteristics that the condensation cure type do not have, such as adjustable curing rate, being completely environmentally friendly, andso on. Therefore, our platinum cure silicone is particularly applicable for largestones molds, artificial stone molds, plaster and other architecture elements replication. The following is some detailed data about the performance of this model

5. Datasheet of Addition Silicone Rubber For Architectural Decorations mold

Model: E-640 Appearance:translucent

Viscosity (cps):30000±8000 Hardness (A°):42±2

Tensile strength (Mpa): ≥4.0 Tear strength (KN/m):≥7

Elongation (%):≥200 Mixing ratio (%):2~3

Operating time(H):0.5~1 Curing time(H):2~5

Need any help on silicone rubber, please feel free to contact Ms Amber:

Email: hyja(at) szrl (dot) net

Website: www (dot) szrl (dot) net

Tel: +86 -0755-8994-8006

Cel: +86-189-3886-7575

Wechat:18938867575