Name: PCD Cutting Tool Blanks
Brief Introduction :More SuperHard PCD Cutting Tool Blanks In The Size Of 5μm、10μm And 25μm Can Be Used In Super-Fine Processing And Fine.
Type: Triangle, Cylindrical, Square, Flake, Etc
More SuperHard PCD Cutting Tool Blanks In The Size Of 5μm、10μm And 25μm Can Be Used In Super-Fine Processing And Fine. They Are Applicable To The Processing Of Non-Metal Materials As Wood, Ceramics,Intensified Planks And Non-Farrous Material As Copper And Aluminum. We Can Supply All Kinds Of PCD Cutting Tool Blanks That Diameter Can Reach 58mm .
Model | Product No | Angle (°) | Diameter (Mm) | Thickness (Mm) | |||
|
MoreD30 | 360 | 30 | 1.6, 2.0, 3.2 | |||
MoreD42 | 360 | 42 | 1.6, 2.0, 3.2 | ||||
MoreD48 | 360 | 48 | 1.6, 2.0, 3.2 | ||||
MoreD51 | 360 | 51 | 1.6, 2.0, 3.2 | ||||
MoreD58 | 360 | 58 | 1.6, 2.0, 3.2 | ||||
Note:The Products Can Be Manufactured Per Customer Request As Non-Standard Shapes Such As Rectangular, Square, Triangle, Rhombus, Sector And So On.
Application Cases Of PCD Cutting Tool Blanks: * 58mm Diameter PCD Wafers Have Sent To American Clients
Advantages: 1. High hardness, abrasion resistance and impact resistance 2. High speed, good surface finish, long life and high efficiency 3. Cutter layout is force balanced to drill a precise round hole and reduce bit whirl 4. Gauge pads have tungsten carbide inserts for maximum wear resistance 5. The diamond layer with thickness over 1 mm increases abrasion resistance of PDC cutter Please don\'t hesitate to contact me if you have any needs:miya AT moresuperhard.com Our company also produces a series of diamond and CBN tools, welcome to consult andchoose at any time |