Continuous Ovens for Transformers - Industrial Ovens
Quick Detail
- Minimum order:1
- Place of Origin:Italy
Specifications
Continuous Ovens for Transformers - Industrial Ovens made in Italy by Idrocalor srl.
TECHNICAL PARAMETERS:
| Working Temperature | 80-160 °C |
| Power supply | Electric or Gas |
| Heat Generator Power | From 6 to 250 kW |
| Internal fans | Up to 4x 7,5kW |
| Inside material | AISI 430, AISI 304 or Galvanized steel |
| Process controller | Siemens PLC or temperature regulator |
IDROCALOR’ovens are widely used in the drying treatments of dry-type, oil filled and cast resin transformers. The reliability and efficiency of our drying ovens assures the transformer’s
highest performances and its long-lasting life. The working temperature range in this application goes from 80° to 160° C. The key factor for a high quality treatment resides in a masterful control
of the air temperature uniformity. A bad management of airflow and temperature inside the oven could lead to undependable results. Idrocalor’s ovens, thanks to a constant temperature monitoring and
a top-notch temperature uniformity, allow a reliable and predictable result for each batch.
USEFUL INTERNAL DIMENSIONS:
| Height [mm] | up to 6000 mm |
| Width [mm] | up to 6000 mm |
| Lenght [mm] | up to 12000 mm |
| Door opening | Manual leaf door, vertical automatic door, … |
| Trolley | Manual, pneumatic or electric |
Optimized Airflow:
Each IDROCALOR’s oven features a fully costumizable air-flow to allow the best heating for the transformers.
The air ducts are costum-made and some of the air-flow settings are also changeable by the Costumer to better suit different products.
An example of an air-flow type can be seen on the image on the left.
The ovens can also feature different type of door openings: vertical electric doors, manual double leaf doors and horizontal doors.
Heat generation can be performed using energy from different means: gas, electricity, steam and diathermic oil.
