2Fiber Ports 4UTP Ports Optical Fiber Media Converter
Specifications
Overview
BD-100M-POE is a 10/100Base-TX to 100Base-FX media converter, which allows two types of network segment to be connected easily. Complied with IEEE802.3af standard, the AC/DC powered PoE media
converter is a
Power Sourcing Equipment (PSE) which combines data transfered over a fiber optic link with 48V (or other voltage) power supply, providing power to IEEE802.3af powered device
(PD) over CAT5 UTP cable (cable length up to 100meters / 330feets). The converter includes a single port PSE controller, which offers PD signature sensing and power monitoring
features. Other features include over-current protection, LFP function. The LFP (Link Fauit Pass-through) allows the media converter to monitor both the fiber and
copper RX port for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link
fault.
Features
2 10/100Base-TX UTP to 100Base-FX fiber media convertion
2 IEEE802.3af PoE PSE compatible
2 9K bytes packet at cut-through mode
2 Built-in AC/DC power supply
2 Over-current protection
2 choice of SC, BiDi or LC connectors for multimode and singlemode
2 DIP switch to set different configurations
2 LFP (Link Fault Pass-through) support
100Base-FX Optical interface:
Connector: SC,FC or ST are optional
Wavelength: 1310nm,1550nm or 850nm(can be chosen by customer)
Optical fiber category:
single-mode 8.3/125, 8.7/125, 9/125, 10/125um
multi-mode 50/125, 62.5/125, 100/140um
multi- mode connection: transmitting range can reach 5 kilometers as farthest;
single-mode connection: transmitting range can reach 120 kilometers.
10/100Base-TX：
Connector: UTP RJ45 connector
Data Rates:
10/100 Mbps (802.3 10Base-T/802.3u 100Base-T)
100Mbps (100Base-FX)
Power over Ethernet Output:
Pin Assignment and Polarity:4/5 (V+),7/8 (V-)
Output Power: please refer to ordering information
Efficiency: 75% min
Short circuit protection: auto recovery
Over current protection: auto recovery
Output Power: please refer to ordering information
Efficiency: 75% min
Short circuit protection: auto recovery
Over current protection: auto recovery
Optical Specification :
| Fiber connector | SC/ST | SC | SC | SC |
| type | multimode | Single mode | Single mode | Single mode |
| wavelength | 850/1310nm | 1310nm | 1310nm | 1310nm |
| Transmission distance | 2km | 25km | 40km | 60km |
| TX send power(min) | -19.0dBm | -15dBm | -9.0dBm | -4.0dBm |
| TX send power(max) | -12.0dBm | -9.0dBm | -5.0dBm | 0dBm |
| Receive sensitivity | < -30dBm | < -30dBm | < -33dBm | <-36dBm |
| Link Budget | 11.0dBm | 15.0dBm | 24.0dBm | 32.0dBm |
95mm(L)x70mm(W)x26mm(H)
Environment condition
Operating temperature: 0C~+55 C
Storage temperature: -20 C~+70 C
Relative temperature: 95%
Input voltage:AC220V, AC100V~AC240V
Input frequency: 47 Hz to 63 Hz
Ordering Information:
|
Part Number
|
Supported Standard
|
Output Voltage
|
Output Current
|
Output Power
|
Remark
|
|
BD-100M-POE
|
IEEE 802.3af
|
48V
|
0.54A max
|
25W max
|
default
|
|
BD-100M-POE-A
|
IEEE 802.3af
|
56V
|
0.54A max
|
30W max
|
optional
|
|
BD-100M-POE-B
|
Non-standard
|
48V
|
0.60A max
|
30W max
|
optional
|
|
BD-100M-POE-C
|
Non-standard
|
24V
|
1.20A max
|
30W max
|
optional
|
