4Voice(FXS/FXO) over Fiber,phone over fiber multiplexer

Functions
The voice(FXS/FXO) phone over fiber multiplexer is point to point fiber transmitting equipment, which realizes 1 port 10/100M Ethernet and 4 channel analog voice phone over fiber transmission. Its merits include complete warning function, high integration, low consumption, stable performance and convenient usage.

PRODUCT CHARACTERISTIC

• Have two row of LED , one indicate local status, the other indicate remote status
• the interface of lan is 10/100M ,full/duplex auto-negotiation
• Provide two clock mode, fiber main clk and fiber line clk
• Have three LoopBack Mode: fiber interface LoopBack(ANA)、LAN interface LoopBack(DIG)、command the remote LAN interface LoopBack (REM)
• Realise auto-speed setting of local device to remote device
• Having pseudo random code test function, can used as a 2M Protocol Analyzer
• Ethernet support N*64k rates, rate from 64k to 2048k.
• Ethernet monitor can reset by itself，it won’t die
• Ethernet data suggested function, real-time indicate data communication state
• Provide 1-4 channels voice access, support calling indication
• Voice port supports O port and S port, O port connect with PBX, S port connect with phone users

Optical interface

Optical wavelength: single mode 1310nm/1550nm

Fiber: single fiber or double fiber for option

Transmitting consumption: -9dBm/-5dBm

Transmission range: 0-50Km/120Km for option

Optical interface: SC/FC

Receiving and dispatching module: >-6dBm

Optical receiver receiving sensitivity <-36 dBm (BER<10-11)

Fiber circuit code: NRZ code

10/100Base-T Ethernet Interface

Rate: 10/100M, full/duplex auto-negotiation

Protocol: Support IEEE 802.3, IEEE 802.1Q (VLAN)

MAC Address Entiries: 4096 Entiries

Total Memory Sizes: 64MBits SDRAM

Physical interface: RJ45, support AUTO-MDIX

Voice Interface/

FXS:

Alarm voltage: 75V

Alarmf requency: 25HZ

2 line input impedance: 600Ω (hanging off)

Wastage: 40db

FXO:

Alarm detecting voltage: 35V

Alarm detecting frequency: 17HZ-60HZ

2 line input impedance: 600Ω (hanging off)

Wastage: 40db

Power supply

working voltage range wide, good

anti-disturb and Isolation, work stable

option I – DC,range DC-36V~DC-72C

option II – AC,range AC90V~AC240V

Power Consumption: <=3 Watts

environment condition

Operating temperature: 0C~+50 C

Storage temperature: -20 C~+70 C

Relative temperature:95% (uncondensed)

Dimension

210mm(L) x 140mm(W) x 30mm(H)

Application 1

FXO---FXS

/

Application 2

FXS---FXS

/