0cr23al5 Alcro Wire Fecral Thermal Spray Wire

  • FOB Price : USD $6.00 / Piece
  • Minimum order:1
  • Place of Origin:Shanghai
  • Size:1.6mm (1/16 Inch)
  • Application:Boiler Tube/Dimension Restoration
  • Spool Type:D 300
  • Wire Weight:15kg Each Spool
  • Wire Type:Solid Wire
  • Coating Hardness:85~90 Hrb
  • Equal to:Pmet 731

Alcro Wire is a ferritic iron-chromium-aluminum alloy (FeCrAl alloy) for use in arc and flame spray systems. The alloy produces dense, well bonding coatings, resistant to high-temperature oxidation and corrosion.

Typical applications for Alcro wire are bond coats in high-temperature coating systems, protective coatings in high-temperature atmospheres containing sulphur or carbon and protective coatings against scaling of conventional low alloy steels.

Chemical composition


C % Si % Mn % Cr % Al % Fe %
Nominal composition




Bal.
Min - - - 20.5 5.3
Max 0.08 0.7 0.4 23.5 6.3

Machining

Depending of surface finish requirements, the coating may be machined by turning or grinding. For rougher surface, turning using carbide tools, light cuts and efficient cooling to avoid overheating is recommended. Grinding in fine steps using cooling, light pressure and clean wheels gives smoother finish.

Mechanical properties

Wire size Yield strength Tensile strength Elongation
Ø Rp0.2 Rm A
mm MPa MPa %
1.6 830 930 5

Physical properties

Density g/cm3 7.10
Electrical resistivity at 20°C Ω mm2/m 1.45
Melting point 1500 °C
Magnetic Properties The material is magnetic up to approximately 600 °C (the Curie point).
Dimension tolerance mm + 0/-0.05

Young\'s Modulus
Temperature °C 20
GPa 220

Typical coating properties

Summary of results obtained when spraying with a conventional Arc Spray gun, using varying spraying parameters.

Deposition efficiency (%) 62-78
Hardness HV (300g) 165-280
Surface roughness (µm) 11-16
Porosity (%) 1-6*
Oxides (%) 5-20*

*) These results are obtained when using air as spraying gas. Also nitrogen has been used, resulting in lower rates of porosity and oxides.

Safety

Personnel working with thermal spraying should be aware of the hazards connected to the process. They should be familiar with the use of equipment regarding, i.e. eye, skin, hearing and respiratory protection.

Shanghai Allotech Industrial Co., Ltd

No 19, Jiliang Road, Danyang development zone in Jiangsu Province . Tel: 86-15900-454763 Mobile: 15900454763 Country: China (Mainland)