Monel 400 Demisters

/

Monel 400 Demisterscan reduce the residence time required to separate a given liquid droplet size thereby reducing the volume and associated cost of separator equipment. Demisters are often used where vapour quality is important in regard to entrained liquids; particularly where separator equipment costs are high (e.g., high pressure systems) or where space or weight savings are advantageous.

Compared to steel, Monel is very difficult to machine as it work-hardens very quickly. It needs to be turned and worked at slow speeds and low feed rates. It is resistant to corrosion and acids, and some alloys can withstand a fire in pure oxygen. It is commonly used in applications with highly corrosive conditions. Small additions of aluminium and titanium form an alloy (K-500) with the same corrosion resistance but with much greater strength due to gamma prime formation on aging. Monel is typically much more expensive than stainless steel.

Monel alloy 400 has a specific gravity of 8.83, an electrical conductivity of approximately 3.4% IACS, and (in the annealed state) a hardness of 65 Rockwell B

We can also make other material demisters:

• SS 304 – SS 304L – SS 316 – SS 316L mist eliminator demister
• Monel 400 – Monel 600 – Monel 800 mist eliminator demister
• Teflonmist eliminator demister
• Hostaflonmist eliminator demister
• Poly-propylenemist eliminator demister
• Inconel 625 – Inconel 825 mist eliminator demister
  

  Knit Type	Koch Divmet	Yorkstyle	Bulk Density kg/m3	Surface Area m2/m3	Void-age %
  - 9048 9048 9030 - 9032 9001 - -	- 9310 3260 4310 3710 4210 4120 5520 5540	- 931 326 431 371 421 - - 333	75 80 128 144 160 173 192 320 432	815 157 800 282 535 360 377 905 2000	93.0 99.0 98.4 98.2 94.0 97.7 97.6 96.0 94.6