Manufacturers produce high-precision sturdy and stable servo terminal machines piercing terminal machines and end presses

Manufacturer\'s production: The servo terminal machine avoids the need to continuously adjust the pressure during the production process, and avoids quality problems caused by improper pressure regulation. The optimized system also makes the crimping quality more stable and more precise, optimizes the system and has the function of protecting the blade.

(Servo crimping machine): The enameled wire with different wire diameters can be crimped at the same time on one crimping machine without adjustment (crimping height). This function is not possible on other crimping devices and is very convenient to use.

There is no need to strip paint, twist wire, dip flux, immersion tin, trim head, etc., as long as one pressure can be energized. That is to save labor and money, and environmental protection without pollution

(Servo motor terminal machine): output setting (ie crimp height setting), height tolerance detection alarm, overlap crimping alarm (protection blade), high-speed down-to-terminal automatic deceleration extrusion terminal during crimping (can compensate for mechanically generated Error, deceleration speed can be set), pressure can be set to the position of holding pressure (can avoid the looseness caused by the rebound of the terminal copper), so that the precision of the crimping height is up to 1 wire, and the maximum degree of crimping the product is more energized. Stable, so that (the enameled wire puncture terminal) crimping puncture effect is optimal. At present, similar products in the domestic and foreign markets have the highest cost performance.

Puncture terminal crimping (servo crimping machine) has the following advantages:

1, no need to adjust the crimp height, automatically crimped into the position, commonly known as \"fool machine.\"

2, cast iron machine, the whole machine is heavy, strong steel.

3, with Taiwan\'s precision molds, the crimping accuracy is higher.

4, the installation of blowing power to avoid the end of the impact of the quality of the crimp.

5. The servo optimization system optimizes the crimping process: high-speed down, slow-speed extrusion, set dwell time in the bottom position, high crimping accuracy, firm and reliable contacts, and good power-on performance.

6, suitable for enameled wire diameter change, there are single-line double-line, there are main and auxiliary lines, enameled wire and lead-out changes, and the function of protecting the blade.

7. Developed specifically for crimping (enameled wire piercing terminals)