IP door access control systems controller panel kits SA-C01T is a single door access controller that used for single door access control system. Mainly used in office access control system and home access control system, this security access control panel offer tighter security as they require particular keys or even a password in order to grant access if you want to break into them.
Model: | SA-C01T |
Quantity of readers | 2 |
Door lock relay | 1 |
Door controlled | 1 |
Input voltage | AC 220V |
Output voltage | DC 12.5V 1.5A |
Working voltage | DC12V |
Operating temperature: | -25℃ to 70℃ |
Operating humidity | 10%-90%RH,no-condensation |
Power consumption of circuit board: | ≤100mA |
Data storage | 26000 pieces of registration cards, 80000 pieces of reading records, 20000 pieces of records of door contact,button and alarm |
Power-off protection measure | High speed memory, can keep 8 years after power-off |
Interface protocol | International standard wiegand 26 bit, 34 bit communication protocol (software can be set, the default for 26 bit) |
Distance from reader to controller | Less than 100m |
Door lock control | Each group relay using NC, COM, NO dry node control output, the maximum control voltage 250 v, 6 a maximum control current |
Communication protocol | TCP/IP |
Communication rate | TCP/IP 10M/100M Self-adaption |
Max communication distance | TCP/IP Communication depends on network coverage |
Max networking | TCP/IP Communication unlimited |
Access control panel size | 115x93mm |
Power supply size | 240*200*61MM |