Three-Axis Antenna Turntable
Quick Detail
- Minimum order:1
- Place of Origin:Wuhan china
Specifications
| Three-Axis Antenna Turntable | |||
|
Inner Axis
（up） |
Centre Axis
（pitch） |
Outer Axis
（down） |
|
| Function | This device has the function of simulation, position and rate; It can simulate the three-dimensional motion of the vehicle, it is used in the semi-physical simulation system of the ground, it provide a almost real sports environment for the load such as the radar antenna and also can provide the benchmark of precise single, two axis and three axis positioning and rate for the tested load, it’s used for static testing and calibration of inertial original components, inertial navigation systems. | ||
| Axis Orientation | Vertical（UOT） | ||
| Maximum Load | 2000-40000kg | ||
| Dimension of Table Surface | 600-1500mm | ||
| bending moment | 1300Nm | 10000Nm | 3000Nm |
| Driving Moment | 1300Nm | 10000Nm | 3000Nm |
| Angular freedom | Continuous | ±95° | Continuous |
| Position Accuracy | ±0.03° | ±0.03° | ±0.03° |
| Rate Range | ±0~±6°/s | ±0~±3°/s | ±0~±3°/s |
| Angular Acceleration | 0~3°/s2 | 0~3°/s2 | 0~3°/s2 |
| Conductive Slipring | 80 rings/3A | ||
| Remote Control Interface | RS232/RS422 | ||
| Other |
The remote control interface can be adjusted by user’s requirements； The quantity of conductive slip ring can be adjusted by user’s requirements； The dimension of table can be adjusted by user’s requirements； Technical parameter can be adjusted by user’s requirements. |
