Direct Forming Mill To Square Pipe/Square Welded Tube Machine
Quick Detail
- Minimum order:1
Specifications
Direct Forming Mill To Square Pipe/Square Welded Tube Machine
/
Product description：
The production of square/rectangular pipes adopts the combined roller.. The roller position will be adjusted by spacer and motor adjustment to realize one set of roller to apply for different size of pipe.
Direct square and rectangular pipe mill feature:
1、Lower production cost: 3-4% material saving
2、Very precise control of the corner radius
3、Frequent production changes without a roll change: possibility to produce small lots of final products
4、Optimized design
5、Very fast changeover
6、Reduced investment: no requirement for different types of rolls and additional floor space for roll storage
7、Very high automation level: minimized operator tuning
| Model | Square & Rectangle Pipe | Opening Cold Forming Steel | Speed (m/min) | ||
| Diameter(mm) | Thickness (mm) | ||||
| LW400 | □100 | 40×40~100×100 | 1.5~5.0 | The Same Specifications | 20~60 |
| LW600 | □150 | 50×50~150×150 | 2.0~6.0 | 10~45 | |
| LW800 | □200 | 80×80~200×200 | 3.0~10.0 | 10~35 | |
| LW1000 | □250 | 100×100~250×250 | 4.0~12.0 | 10~35 | |
| LW1200 | □300 | 150×150~300×300 | 4.0~14.0 | 10~30 | |
| LW1400 | □350 | 200×200~350×350 | 4.0~16.0 | 10~30 | |
| LW1600 | □400 | 250×250~400×400 | 6.0~18.0 | 6~20 | |
| LW2000 | □500 | 300×300~500×500 | 8.0~20.0 | 6~20 |
/
/
/
/
/
/
