13mm Thickness Disc Slip Ring Connector electrical slip ring with house
Quick Detail
- FOB Price : USD $200.00 / Piece
- Minimum order:1
- Place of Origin:China
Specifications
/
13mm Thickness Disc Slip Ring Connector
Disc type conductive slip ring
One end of the piece is connected to the stator, the other end of the bullet is connected with the rotor, and the stator and the rotor are provided with an installation hole to install the disc slide ring on the use device, and the rotor is welded with a wire. The disc type conductive slip ring is specially designed for a highly restricted rotating system in the vertical direction. Its copper rings and brushes are connected around a central hole, which greatly saves the height of the space. Customers can choose suitable slip rings for mechanical equipment installation according to the overall structure and different design of the slip ring.
/
Feature:
1.Contact material:gold-gold contacts
2.Inner Diameter:35mm
3.Ultra-thin pancake slip ring
4.Longer lead lengths available
5.Power and signal combinations
13mm Thickness Disc Slip Ring Connector
Model Explanation:
/
13mm Thickness Disc Slip Ring Connector
Installation Instructions:
Flange mounted:
/
/
Specifications of 13mm Thickness Disc Slip Ring Connector
| Operating Speed | 250 rpm |
| Number of Circuits | 6 |
| Voltage | 240 VAC/DC |
| Current Rating | 10A per circuit |
| Temperature Range | -20°Cto +80°C |
| Contact Material | Gold to Gold |
| Lead Size | 22# silver plated copper |
| Lead Length | Standard 250 mm(9.843inch) |
| Dielectric Strength | ≥500 VAC @50Hz, between each circuit |
| Insulation Resistance | 100 MΩ @ 500 VDC |
| Electrical Noise | 5mΩMin |
CERTIFICATES:
/
COMPANY INFORMATION
13mm Thickness Disc Slip Ring Connector
/
PACKAGING& SHIPPING
13mm Thickness Disc Slip Ring Connector
/
/
Q1: How long is your production lead time?
A: It needs 7 to 15 days for standard products, 10 to 20 days for simple customized products,
15 to 40 days for complex customized porducts.
Q2: What technical data should be provided for our customized slip ring model?
A: If you want to costomize the special slip ring model, you need provide details as below:
a.operatring speed(RPM)
b.the type of installation
c.outline size
d.channels(the No. of single wire besides cable)
e.rated voltage & current for power rings and signal rings
f.the signal type and related
parameters(very important)
g.operating temperature h.IP(sealing requirements)
If you have any other questions, pls contact us without any hesitation.
/
