Hot applied sealant type N2 BITAREL BTL (for road repairs)

  • Minimum order:1

Hot applied joint sealant Type N2 BITAREL BTL

Purpose.

For sealing deformation joints and cracks of all concrete and asphalt concrete pavements, as well as repair of narrow cracks of concrete and asphalt concrete pavements up to 5 mm wide.

Average consumption.

1.1-3.8 kg / m² (sealant consumption depends on the width and depth of the joint).

Directions for use.

Works on sealing and repair of cracks should be carried out in dry weather at an ambient temperature not lower than 5 ° С.

Before applying the sealant, the asphalt surface must be cleaned from dust, dirt, debris, oils, and in the presence of water or ice, the surface must be flushed with compressed air.

The area of the repaired crack should be dry and not contain loose parts.

The sealant must be heated in a sealant boiler equipped with a stirrer to an operating temperature of 160-180 ° C.

It is forbidden to heat the sealant to a temperature above 180 ° C, to keep it in a heated state for more than 8 hours.

It is not advisable to warm up more than 2 times.

Temperature limits of sealant operation from -15 ° С to + 60 ° С.

When sealing joints and cracks at air temperatures above 25 ° C, pressurized joints should be powdered with dolomite filler, chalk, talc, crushed rubber or other fine inert materials to prevent sticking.

Delivery form:paper bag 25kg, drum 20 kg, carton box 15 kg

BITAREL LLC

Export development Manager

Roman Kretsu

Telefon mob.: 375 29 640-30-91 (Viber, WhatsApp, Telegram)

Skype: roman.kretsu

e-mail: krf@bitarel.com

www.bitarel.com

BITAREL

Tel: 375-29-6403091 Mobile: 375-29-6403091 Country: Belarus