Polymer PTFE Teflon Rod Bar Extruder Ramextruder

RAM Extruder For PTFE Rod(Φ300-600mm)

This PTFE extruder is able to extrude rod which dia from 300mm to 600mm. The automatic

productionline is controlled by computer, which is really easy to operate. Meanwhile, the

plastic extrusion machine is advance designed, high output, low energy consumption, long-life,

and also our professional engineer is available to offer overseas after sale service. We can solve

various problems to improve the equipment efficiency for you.

Ram extrusion machine for Teflon rod

The China vertical RAM Extruder is designed with 2 pressure plates, so the ream is affected via a

slid pressure plate. The China rod ram extruder is equipped with two hydraulic cylinders.

The main cylinder serves to move the ram; the additional cylinder serves for retracting the

mandrel. Base plate and dosing tray are water-cooled.

The PTFE powder is feed into the rotating hopper via an exact working powder dosing device,

controlled by a level indicator. By means of a rotating blade the powder is wiped uniformly into

the cavity of the mould.

Range of diameter PTFE Extrusion 300 to 600 mm, Heating zones 4-6 zones

The complete electrical control is laterally fastened at rod ram extrusion. With a PC touch screen

panel all speeds and temperatures can be programmed. Electronics contain the necessary

automatic controllers for speeds and temperatures. Five temperature regulators are contained in

the plant, four for the extruding pipe and one automatic controller for a mandrel heating element.

The maximum output speed of PTFE extrusion depends on: physical property , like Specific Gravity

and Elongation, outside of PTFE rod diameters and PTFE product heating length.

PTFE Equipment Warranty: according to our standard terms: 12months

/

Email:export@sukoptfe.com

Web: http://www.ptfe-machinery.com/

http://www.sukoptfe.com/

HOT TAGS:TEFLON PTFEROD;TEFLON PTFE TUBE,TEFLON PTFE EXTRUSION