Liquid Pad Printing Silicone Rubber Material

Pad Printing Silicon Rubber Usages:

Pad printing silicone rubber is mainly use for printing irregular patterns on plastic toys, shampoo, pen, glass ,electroplating toys and trade makers and so on .

Pad Printing Silicon Rubber description

Pad printing silicone rubber as a carrier which transfer patterns on the steel plate to the toys products surface.

Pad Printing Silicon Rubber Features:

1) High print times

2) abrasion resistance.

3) Good printing effects

4) Permanent and durable

Pad Printing Silicon Rubber Operation Instructions:
Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.

Step Two: vacuum pumping

Without exception, this step takes less than 10 minutes.

Note: The time for vacuum-pumping should be less than 3—5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.

Step Three: Pouring the vacuumed mixture into the original mold slowly,when it turns dry,you can take the product out,then the mold is done.

Shelf life for Pad Printing Silicon Rubber

8~10months, when stored in a dry & cool place under the room temperature 25.

Packing for Pad Printing Silicon Rubber

20kgs/drum vacuumed packing

For further information, pls contact with Mr. Samuel

TEL: 0086-755-89948006

Mobile: 0086-18938867572

Mail : samuelsilicone(at)gmail(dot)com

Welcome to visit www (dot)szrl (dot)net anytime .