LS108H spectrum transmission meter

LS108H Spectrum Transmission Meter Introduction

LS108H spectrum transmission meter is a desktop instrument, which is professionally used for optical transmittance test of various materials such as lens, glass, coating material, organic material and paint, etc. The test aperture of the meter is 1mm, which is suitable for the measurement of light transmittance, infrared and ultraviolet transmittance of small-sized materials. The flat bench-top meter is convenient for placing various test samples. The test is fast and accurate. Once the test material is placed on the meter, the test results will be displayed immediately. The meter use parallel light path design that can measure thick materials.

The LS108H optical transmittance tester use ultraviolet light source, infrared light source and visible light source to illuminate the transparent material under test. The sensor detects the incident light intensity of the three light sources and the light intensity after passing through the transparent material under test. The ratio of the over light intensity to the incident light intensity is the transmittance, expressed as a percentage.

LS108H Spectrum transmission meter Parameters

UV peak wavelength 365nm

IR peak wavelength 940nm

Visible light 380nm-760nm full wavelength,in line with CIE photopic luminosity function

Resolution 0.1%

Measurement accuracy Better than ± 2% (colorless and uniform transparent materials)

Minimum test sample size ￠ 1mm

Dimension 170 mm ×180 mm ×144 mm (L*W*H)

Weight about 1570 g

Power supply 5V AC / DC power supply, or powered by mobile power