Dropping Ball Impact Testing Machine With 227g / 508 g /1040 g/ 2260 g Steel Ball

Dropping Ball Impact Testing Machine With 227g / 508 g /1040 g/ 2260 g Steel Ball

Suitable for impact test of safety glass and tempered glass.

Related Standard:

ISO 3537 Road vehicles — Safety glazing materials — Mechanical tests– Clause 6: 227 g ball test, Clause 7:2260 g ball test

GB 15763.3 Safety glazing materials in building Part 3:Laminated glass–Appendix B Drop ball impact specimen support

Steel Ball：2260g / 82mm 1040g / 63mm 535g / 51mm 508g / 50mm 227g / 38mm

Drop Height: 1000mm, 5000mm, 12000mm, Customized

Automatic release and lift. Power: 220V 50Hz 580W

Supporting Fixture:

a) Support Size: 350mm*350mm and 660mm*660mm (Customized)

b) Frame width 15mm

c) Steel box height 150mm

d) Rubber Gasket: thickness 3mm, width 15mm, hardness shore A50

e) Interposed sheet of rubber: thickness 3mm, hardness shore A50

Applied Test Pieces Size: 300mm*300mm 610mm* 610mm

/

227 g Ball Test, 2260 g Ball Test, Test Method for Ball Drop Impact, Ball Test, Support Fixture, Support Frame, Safety Glazing Materials Test, Mechanical Test, Drop Ball Impact, Ball Drop, Glass test, Impact Test, Glass Impact

This testing device confirms to the standards of ISO3537and GB15763.3. It is applicable for the impact performance test of the equipment enclosure. It has the advantages of accurate performance and convenient operation as well as reasonable layout. Adjusted to a certain height, the steel ball, whose weight is required, falls down to hit the testing sample. Then the tester can judge the quality of the sample according to the damage degree of the testing sample. It can be used in the fastness test of the enclosure with the material of plastic, ceramic, acryl and Glass fiber.

/