1.6mm Amorphous Alloy /Tafa 90mxc Thermal Spray Wire
Quick Detail
- Place of Origin:China
- Minimum order:30
- FOB Price : USD $18.00 / Piece
Specifications
Description
Amorphous Alloy is a cored wire specifically designed for arc spray systems. It produces a partially amorphous, hard, abrasive and corrosion resistant coating, with a service environment up to 1600
degrees F. High chrome like finishes can be obtained by typical grinding and lapping techniques. It has found use in a wide variety of high wear applications, anti-skid surfacing applications, and
corrosive environments. The addition of 9% nickel gives it greater corrosion resistance than 95MXC for most environments. It can equivalent to Tafa 90MXC.
Applications
Boiler Tubes & Tube Shields
Rolls
Anti-Skid
Product Details
Chemical composition
| Grade | Chemical composition(%) | ||||||
| Amorphous Alloy | Cr | Mo | B | Ni | Si | Mn | Fe |
| 23 | / | 2 | / | 1 | / | Balance |
Typical Deposit Characteristics
| Typical Hardness | Bond Strength | Deposit Rate | Deposit Efficiency | Corrosion Resistance |
| HRC 45-50 | 10000 psi | 10 lbs/hr/100A | 80% | Excellent |
Sizes & Packaging
| Diameter | Packaging | Wire Weight |
| 1/16\" (1.6mm) | MIG (D 300) | 15kg((33 lb)/spool |
Note that special sizes or packing requirements are available on all requests.
