medical protective clothing blood penetration resistance tester
Quick Detail
- Place of Origin:China
- Minimum order:1
- FOB Price : USD $3,000.00 / Piece
Specifications
medical protective clothing blood penetration resistance testeris applicable to the resistance of the protective clothing to the synthetic blood penetration under different
levels of test pressure.
Product Introduction
1. The protruding sample fixing device can simulate the actual use state of the mask, set aside the test target area without destroying the sample, and distribute the synthetic blood in the
target area of the sample. 2. The special fixed-pressure injection device can eject a certain volume of synthetic blood in a controlled time. 3. It can fully simulate the injection speed
corresponding to the average blood pressure of human body of 10.6kpa, 16kPa and 21.3kpa. 4. A fixed target plate is set to block the high-pressure edge part of the injected liquid flow and only
allow the steady flow part to be sprayed on the sample, which increases the accuracy and repeatability of the liquid velocity sprayed on the sample. 5.Square metal barrier net: open space ≥50%;
bending ≤5mm at 20kPa. 6.Digital display timer, accuracy ± 1 second. 7.The instrument has a clamp that can generate 13.5Nm torque.
Technical StandardMedical respirator technical requirements, 5.5 synthetic blood penetration barrier performance YY/T 0691-2008 infectious pathogen protection equipment medical
mask resistance to synthetic blood penetrability test method (fixed volume, horizontal injection) YY 0469-2011 medical surgical mask technology requires a blood penetration test device ISO
22609:2004 infectious pathogen protection equipment medical mask test method for resistance to synthetic blood penetration (fixed volume, horizontal injection) ASTM F1862-07--- Standard Test Method
for Resistance of Medical Face Masks to blot by Synthetic Blood (Horizontal Projection of Fixed Volume at a Know Velocity) EN 149----Respiratory protective devices--Filtering half masks to protect
against particles-Requirements,testing, marking EN 14683----Medical face masks--Requirements and test methods
