358 Steel Work For Airport Security Fence

• hot dipped galvanized high tensile steel wire to the pre drilled holes in the Reinforced concrete post in three lines to receive welded mesh in accordance to BS 1722.
• Three lines of strand galvanized barbed wire (3mm) in equal rows to the pre drilled r.c posts,3mm, hot dipped galvanized.
• Coiled razor wire of 600mm diameter fixed to three lines of strand galvanized barbed wire(3mm) in equal rows to the pre drilled Reinforced concrete posts
  .Fence posts shall be provided with a double cranked extension arms as described in BS 1722 (10).
• 2400mm high galvanized welded mesh in anchored into the concrete at the bottom along the entire length in accordance to BS 1722 Part 10. It shall be a 2.4meter high fence with an additional 0.3meter buried beneath ground level (2.7meter total). The mesh shall be 3mm diameter steel wire, zinc coated with an outer plastic sheath.
• Supply and fix standard steel gate welded 50x25mm hollow section frame with 25x12.5mm hollow section stirrups and bracing double swing 2100mm high by 6m wide complete with iron mongery.

/
358 welding wire mesh topped razor wire for airport fencing

/
358 Anti-climbing Mesh Security Fence

/
High Security Fence with Electric Fence, CCTV system and gates, for prison and other uses