filter bag

polypropylene filter bag( PP filter bag)

1. 3D space inside of non-woven fibers, capture small particle directly, high efficiency, low cost, large capacity of dirty particles.

2. Low temperature resistance ( 80-120 °C)

3. Micron rating: 0.5-300um

4. Excellent resistant to hydrolysis, acids and alkalis.

5. Smooth surface, more defined pore size and good air permeability

6. Lower fiber release, Lower density, High mechanical characteristics

Polyester filter bag (PE filter bag)

Breaking Strength-Warp	1200 N / 5cm*20cm
Breaking Strength-Weft	1400 N / 5cm*20cm
Breaking Elongation-Warp	20%
Breaking Elongation-Weft	30%
Continuous	130 deg C
Surge	160 deg C
Finish Treatment	Calendaring, Singeing, Heat setting
Anti-Acid	Middle
Anti-Abrasion	Excellent
Hydrolysis Stability	Middle
Anti-Alkali	Middle
Working pressure(Mpa)	1.0
Working temp℃	-20-160

monofilament nylon filter bag (NMO filter bag)

Use the principle of surface filtration; non-deformable single fiber is made into mesh according to special weaving type, and is welded together to add mesh strength. The impurities can be hold back onto the filtering surface.

1. Single mesh-like structure

2. Fixed Grid

3. Good tensile - explosion proof performance

4. Strengthening the outer lining hem

5. Suitable rigid intercept impurities and high viscosity fluids

6. Easy to clean

7. Chemical resistance: base, aromatic hydrocarbons, aliphatic compounds

8. Surface filtration

Advantages: Monofilament structure can be repeatedly cleaned, it has lower consumption cost.

It suite the rough filtering cases where the filter fineness is low.

Micron rating: 1-1250um.normally:25-1000um.

Customized design bags to meet your specific application