Lifecasting silicone rubber

Lifecasting silicone rubber is easy to use and cures quickly.It reproduces fine detail and could makes an excellent mold for any body part.

Acctually Silicone rubber is this special kinds material situable to you to make these funny things.

Lifecasting silicone rubber could use to make lifesize figure , Grave Corpse Monster for haunted house, torso casting .Also the other mould like baby's hand/foot,adult's hand/foot,face,full headshoulders,front torso,fulltorso,arm to shoulder,buttocks,intimate areas,and full body.

This silicone is also suited for use with confectionery, speciality foods and is safe for contact with skin for life castings. Detailed reproduction of figures, art objects and similar items. Suitable for use with polyurethane resins, polyester resin, acrylic resin, plaster, cement and waxes..

Pot life of 20-40 mins with a cure time of 6-8 hours at 25°C.

If both components are pre-heated to 30°C before mixing the mixture will have a pot life of 10-15 mins with a cure time of 1-2 hours.The two components mix easily by hand with a 1:1 ratio and because of the low viscosity can be used without processing in a vacuum chamber.

There is the steps how to make a life casting share to you.

1.Make a silicone mould

Firstly,you should choose an original mould,could be your own body ,finger,or the mould your customer need ,it’s just depend on you.Then take some Lifecasting silicone rubber(the weight is depend the size of your original mould )with Platinum catalyst(Nontoxic),and stiring them evenly.

After, could use a brush to brush the silicone to original mould evenly,about the thickness , 2-5 mm is OK.10 minuite later could demould.

2.Use the silicone mould to produce your products.

After finish the silicone mould, brush some release agent on silicone mould.Take silicone rubber (with skin color) ,and add Platinum catalyst ,then stiring evenly.Pouring it to the silicone mould ,20 minutes later,could demould and have finish your perfect product.

If your want make a scary clown or Haunted House contents,then could paint the color you want.

It’s so easy,yes?

For the addition platinum cured silicone rubber ,have many good features as below:

odourless and non toxic.

Long mould life

virtually no shrinkage

high tear resistance

high dimensional stability over time

non-deformability and excellent reproduction of fine detail.

Call Ms Ellar or sent e-mail with questions about your application.

Mobil:86-0755-18938867533 Phone: 86-0755-89212365

Welcome to visit www(dot)szrl(dot)net to know more information

https://www.facebook.com/mouldsilicone youtube:http://www.youtube.com/channel/UCed_-QO7UZneNYsWTxR1KFA

linkedin:http://www.linkedin.com/profile/view?id=189510785&trk=nav_responsive_tab_profile_pic

twitter:https://twitter.com/Saminaray