Industrial Roll Small Rolled Paper Production Line
Quick Detail
- Place of Origin:China(Mainland)
Specifications
DC-RSM-1092/3000II
Different from our previous machines and similar machines from other companies, our newly designed machines are innovative and improved with the below characteristics.
1. Toilet paper rewinding machine adopts full metal wallboard structure
2. Transmitted by timing belt
3. Speed increase by 20%-30% comparing with old frame type machine
4. Low working noise, durable transmission
5. Air pneumatic controlled perforating unit. Replace the old sawing blades with imported blades, which
can wear well with long time. No need to adjust the blades within 1 year of usage. Delicate perforating lines and indicates superior grade quality.
6. High speed log saw machine with nice-designed grinding structure, full improve the sharpening
effect. Metal wallboard structure, with improved clamp tool structure. Convenience at changing of clamps of different specifications.
7. High cost performance, obvious advantages among similar products.
| Machine Model | 1575 | 2800 |
| Width (mm) | 1800 | 2800 |
| Finished Products Diameter | Φ 90～300mm (Tightness can be adjustable) | |
| Finished Products Inner Diameter | 50 -76 mm | |
| Jumbo roll diameter (mm) | Φ 1200MM | |
| Jumbo Roll Inner Diameter | 3”，76.2 mm (other sizes can be ordered) | |
| Perforation distance (mm) | 4 knife(blade)，90～160mm；2 knife(blade)，180～320mm | |
| Production speed | 250 m/min | |
| Parameter set | Man-machine Interface Operation System | |
| Programmable controller | PLC program | |
| Mechanical driving | Driven by stepless speed-regulator to guarantee the precise length of final products. | |
| Jumbo roll stand | 2 plies | |
| Air pneumatic system | 5 Pa (air-compressor), the minimum pressure 8kg/cm2 pa (customers should be prepared by themselves) | |
| Power | 6.5-18KW (Frequency speed-regulate ) | |
| Overall size | 7 X （2.8-3.8） X 1.8 M(L×W×H) | |
| Embossment | ONE embossment | |
| Embossment down roller | rubber roller | |
| Perforation mode | Air pneumatic separating unit |
DC-DH1575/3000II
High-speed Log Saw Machine
| Rolled core length | Different in rolled core length, different in machine price. | |
| Finished products diameter | sizes from 150-300mm can be ordered) | |
| Horizontal cutting length | Changeable, Servo control, Tolerance ±1mm | |
| Machine speed | 40-70 cuts/min, 1 rolls/cut | |
| Operation speed | 60cuts/min, 1 rolls/cut | |
| Function model | Spiral rotating the round blade & Continued Paper Roll Marching | |
| Driving control | Servo motor driving | |
| Knife grinding | Pneumatic grinding wheel, time can be controlled on panel | |
| Round blade outer diameter | 1000mm | |
| Clamping tool | Exchangeable (outer diameter of finished core can be designated.) | |
| Finished products specification: | Rolled core outer diameter | 150mm-300mm |
| Cutting length | 50mm-300mm | |
| Left-over length | 25mm-50mm | |
| Power | 15KW | |
| Machine size | LXWXH (M) = 9 X 2.8 X 2.2M | |
| Weight of equipment | 6．5T |
Note: This production line is of high production efficiency. With the production speed of 250m/min, Machine Model 1575 can produce up to 4 tons of finished paper product in one
working day (8 hours); while Machine Model 2800 can produce up to 6.5tons.
