CE/ROHS 189mm led r7s 15w smd5050 with 3 years warranty

  • Place of Origin:Shenzhen China

1. led R7S,Chinaled R7S,
2. Power: 15w led R7S,
3.Power optional:5w,8w,10w,13w,15w,
4.Isolated Driver,Rubycon Capicity.
5. Ideal for flood light, replace a halogen 189mm R7S type lamp,

Model Number HM-R7S-15W
Power 15W
Housing Material: Lathe Aluminum
Input voltage 85-265VAC
LED Quantity: 72PCS
LED Type: SMD 5050
Luminous flux 1300-1350lm
Color temperature 2800-3000/4000-4500/5500-6500K
Color rendering index: 75-80%
Socket available: R7S
Frequency: 50-60HZ
Size Dia 54 *H 189 (mm)
Beam Angle: 200°
Humidity: 0-95% non-condensing humidity
Ambient temperature: -40°- 50°
Working Life: 50000h
Net Weight: 200g
Certificates: CE & ROHS
Warranty: 3 years

R7S LED Light Features:

1,Ideal for flood light. Replace a halogen 118mm R7S type lamp.

2,Extruded aluminum material crust good for heat dissipation

3,Constant voltage source and constant current source LED drive

4,NO shadow and shatter-resistant, Beam angle as widely as 200°,

5,Only 65°C for surface temperature with multiple heat dissipation

6,High brightness of Epistar SMD, more than85% efficiency

7. Easy to install and maintain

8. Long lifespan, low cost of maintenance

R7S LED LightMain Application:

1. Architectural decorative light.

2. Archway, Canopy and bridge edge light.

3. Amusement park, theater and aircraft cabin mood light.

R7S LED LightTesting process:

1,We purchase the raw materials of the R7S LED Lamp from foreign well-known brand suppliers

2,Finished R7S LED Lamp must be made 1000 times on-off test firstly, then go on aging test for 48 hours. Through these two steps strict test, ensure all the R7S LED Lamp meet the quality standard.

3,The R7S LED Lamp must be tested under a series of bad condition, including the highest temperature 150°C and the lowest temperature -40°C

R7S LED LightUsage Notice:

1,No ballast need, Any ballast should be removed before installation

2,The R7S Led LAMP is not water-proof

3,The socket temperature peak is 65°C,do not touch the aluminum or any part while working

Hami Opto Technology Co., Ltd

Wangtang Industrial area, Bantian Street,LongGang District, Shenzhen China Tel: 86-755-85268575 Fax: 86-755-32817295 Country: China (Mainland)