Analog Galvo Driver

Han\'s Scanner analog galvo driver board is designed for the full series of Han\'s Scanner photoelectric galvanometer motor, using the traditional PID closed-loop control mode, stable and reliable performance; with a variety of different configurations, support analog and digital signal input, a variety of different power amplifier devices can drive mirrors with different loads from 3mm-50mm to achieve optimal dynamic performance, to meet the speed and accuracy requirements of various high-end applications.

Key Features Of Analog Galvo Driver

3-in-1 analog driver board

Integrate DA card and analog driver board, compact size

TDA8950 D class work output, low heat

First generation galvo driver

More than 10 years in the market, stable performance

A driver board drives a galvanometer

LM3886 AB dual-power amplifier, maximum 68W+68W power output, strong driving capability

Second generation analog driver board

TDA8950 type D power amplifier output, low heat

A driver board drives a galvanometer, driving capacity is strong

TDA8950 power amplifier, maximum 150W+150W power output, strong driving ability

Improved speed performance by more than 50% compared to the first generation analog driver board.

Specifications Of Analog Galvo Driver

Analog Galvo Driver Electric Parameter

Power Supply Requirements +/-15 to +/-28 VDC Configurations Available

Maximum Drive Current Limit 10 AMPS Peak

5 AMPS Rms (Power Supply And Load Dependent)

Operating Temperature Range 0～50℃

Connector Definition

Description J2 (10pin) Of Driver ST16xx

GND 1

GND 2

GND 3

GND 4

POS1 5

MOTOR+ 6

MOTOR- 7

GND 8

LED+ 9

POS2 10

Description J1 (2pin) Of Driver ST16xx

- 1

+ 2

Description J3 (4pin) Of Driver ST16xx

-15V 3

GND 2

+15V 4

NC 1

Description J4 (10pin) Of Driver ST16xx

NC 1

POS_FB 2

GND 3

CMD_ERR 4

V_CRT 5

V_LED 6

NC 7

NC 8

1. Electronic Parameters

Power Supply Requirements +/-15 to +/-28 VDC Configurations Available

Maximum Drive Current Limit 10 AMPS Peak

5 AMPS Rms (Power Supply And Load Dependent)

Operating Temperature Range 0～50℃

Connector Definition

Description J2 (10pin) Of Driver Board ST16XX Remark

GND 1 Power Ground

GND 2 Power Ground

GND 3 Power Ground

GND 4 Power Ground

POS1 5 Photocell Position Feedback Signal 1

MOTOR+ 6 Motor Signal +

MOTOR- 7 Motor Signal -

GND 8 Power Ground

LED+ 9 LED Positive Terminal

POS2 10 Photocell Position Feedback Signal 2

J1 Analog signal control port, communication through serial port

Description J1 (2pin) Of Driver Board ST16XX Remark

- 1 Analog Negative Signal Input (Pulse Signal)

+ 2 Analog Positive Signal Input (Pulse Signal)

Description J3 (4pin) Of Driver ST16xx Remark

-15V 3 Negative Of Power Supply (Current 3A)

GND 2 Power Ground

+15V 4 Power Supply Positive Electrode (Current 3A)

NC 1 Suspend In Midair

Description J4 (10pin) Of Driver Board ST16XX Remark

NC 1 Suspend In Midair

POS_FB 2 Motor Position Feedback Signal

GND 3 Power Ground

CMD_ERR 4 Command Error

V_CRT 5 Motor Current Sampling Signal

V_LED 6 Motor LED Voltage

NC 7 Suspend In Midair

NC 8 Suspend In Midair

For more information about cost of galvanometer and buy scanning galvanometer, please feel free to contact us!