Speed Directional Pulse Hole Metallizing

  • Place of Origin:China

ZP6108 High Speed Directional Pulse Hole Metallizing

I. Introduction
Structure

★1.Use high speed pulse power source for plating, supply uniform good quality coating.

★2.Fully ABS engineer plastic machine body and inner

groove, with antiseptic, thermo stability, technology flow is beautiful.

★3.Environment protection black hole technology flow application,

No pollution, it can direct discharge.

★4. Cathode oscillation technology, prevent , concentration gradient, add hole inner liquid flowability.

Technical specification:

★1.With 4 groove structure, with acid-washing, soak conducting resin, activate, electroplating function.

★2.Use transparent flip function, it is easy to observe and storage.

★3. Maximum board: 400×400mm, it can electroplating

5 boards at the same time.

★4. Minimum hole diameter: 0.3mm

★5.Maximum thickness ratio 5:1

★6.Output frequency: 0-2kHz adjustable(it can change

as DC power)

★7.Output current: forward direction 0-5A, reverse 0-20A adjustable.

★8.Pulse width: use pulse directional power, forward direction 0-100%, reverse pulse 0 to 100% single adjustable.

9.constantvoltage constant current: current or voltage is

constant, with self adjust function, 2 directional current

real time display function.

★10.time setting: work time preset function, time remaining display and automatic power off alarm.

★11.LCD:6 inch full color LCD, display all work specification.

12.Circuit protection: with short circuit, open circuit function, supply alarm signal.

Jinan Should Shine Import And Export Co., Ltd.

No. 15612 Century Avenue, Room 1612, Building 1, High Tech Zone Tel: 86-531-67808851 Fax: 86-531-67808851 Mobile: 18053222712 Country: China (Mainland)