POE Surge Protector (Gigabit)

Power over Ethernet protector is designed for POE power surge supply equipment, are widely used in the areas of wireless coverage, security monitoring, etc. to protect the communication equipment\'s SPD POE port line from the impact of lightning Electromagnetic pulse, lightning electromagnetic pulse, switching overvoltage.

Features of SPD for Ethernet Power System POE6-48 POE6-48-24

Multi. Protection circuits, Gas-Tube+ TVS technology

Dual protection in Common module and different module

TVS array technology, low capacitance

Multi-Strike Capability

Application Of SPD China for Ethernet Power System POE6-48 POE6-48-24

POE6-48 POE6-48-24 is designed for Ethernet device not to be spoiled by lightning over-voltage, induced over-voltage, and static discharge.

CAT6, CAT5e, and CAT5 compatible

802.3af

10/100/1000 Base-T Gigabit Ethernet protection

LAN, FDDI, CDDI, ATM, WLAN

PDH, SDH, SPDH

Industrial control

Technical Parameters of Ethernet Surge Protector POE6-48 POE6-48-24

Model POE6-48 POE6-48-4 POE6-48-8 POE6-48-24

Lightning projection

zone(LPZ) 2

Standards Compliance IEC61000, EN60950, GB/T18802.21-2002, TB/T2311-2002

According to IEC61643 III

According to DIN

VDE6075 Part6

(Draft 11.89) A1, A2 D

Max continuous

operating voltage Uc 68VDC

Nominal working

voltage(Un) 48VDC

Nominal discharge

current (8/20µs) In 3KA

Max discharge current

Imax (8/21µs) Imax 5KA

Voltage protection Level

@C2(8/20µs) Up ≤190V(L-L)≤500V(L-G)

Voltage protection Level

@C3(1kV/µs) Up ≤145V(L-L)≤600V(L-G)

Rated load current IL 200mA

Limiting Voltage

(10/700µs) ≤20V

Cut-off Frequency fG 250MHz

Response time tA

(L-N/N-PE) 1ns

Protection line 1/2, 3/6, 4/5, 7/8

Mounting Be Installed between protected equipment and signal line

Adapt Transmission rate 1000Mbps

Transmission standards 100BaseT/ 1000BaseT/1000Base TX, CAT5/CAT6, POE

Dimension 104H)×58(W)×28(L)mm 95 (H)×85(W)×48(L)mm 190 (H)×85(W)×48(L)mm 482 (H)×86(W)×44(L)mm

Interface form RJ45

IP code(IEC EN 60529) IP20

Error rate ≤10-12

Material/color Aluminum/Blue

Insertion loss ≤0.1dB

Working conditions Temperature: -40 to 85℃, Relative humidity: ≤95％

If you want to know more kinds of poe lightning arrester and ethernet arrester, please visit our website.

As one of lightning protection companies, we will do our best to meet all the needs of customers.