liquid silicone for making transfer pad
Quick Detail
- Color:Any color
- Mixing ratio (%):2-3
- Curing type:Condensation cure
- Pot life (mins, under 25℃):30-40
- Curing time (hrs,under 25℃ ):3-4
- Hardness ( Shore A ):30±2
- Tensile- strength (MPa) :4.2
- Tear- strength (kN/m) :27±2
- Viscosity (After A/B mixed ,mPa.s) :33000±2000
- Elongation (%):500%
Specifications
liquid silicone for making transfer pad Application:
liquid silicone for making transfer pad is mainly use for printing irregular patterns of plastic toys, electroplating toys and trade makers. Pad printing silicone rubber as a carrier which transfers patterns on the steel plate to the toys products surface.
liquid silicone for making transfer pad Description:
liquid silicone for making transfer pad has the advantages of abrasion resistance, high temperature resistance, good printing effect, etc. , which made of top-quality raw material due to adding American Dupont Teflon high-temperature resistance new material, is processed through high-temperature machining.
liquid silicone for making transfer pad Datasheet:
| Model | Color | Mixing ratio (%) | Curing type |
Pot life (mins,
under 25℃) |
Curing time
(hrs,under 25℃ ) |
Hardness ( Shore A ) |
Tensile-
strength (MPa) |
Tear-
strength (kN/m) |
Viscosity
(After A/B mixed ,mPa.s) |
Elongation
(%) |
| HY-918 | Any color | 2-3 | Condensation cure | 30-40 | 3-4 | 30±2 |
4.2
|
27±2
|
33000±2000 |
500% |
liquid silicone for making transfer pad Instruction:
Pad printing silicon rubber is two-component silicon, part A is the liquid silicon rubber, part B is the catalyst. The usual mixing ratio for silicon rubber and catalyst is 100:2-3, eg. We take 100grams of liquid silicon rubber, then we add 2-3 grams catalyst, mix then evenly and pour it to your mold. Then after 2-4 hours, you will obtain a printing pad.
liquid silicone for making transfer pad Frequently asked question:
The reasons why the silicone pad has a short service life are listed as follows:
(1)The problem caused by inappropriate filtration of silicone rubber, and impurities in the packaging process due to the uncleanness of barrels and bags.
(2)The short service life of the silicone pad has a close relationship with the adding amount of silicone oil. The more the silicone oil added, the softer the silicone pad will be. The silicone oil will destroy the molecule of the silicone rubber, thereby bringing about the non-durable and easy ageing of the silicone pad.
(3)All the users should know the properties of pad printing silicone rubber. The service life of the silicone pad has close relationship with the size of the printed patterns. For example, if a big pattern to be printed, a big silicone pad is required; if a small pattern to be printed, a small silicone pad (the silicone pad has to be adjusted according to the size of the patterns, and the proportion between the size of the silicone pad and the pattern is 3:1.)
liquid silicone for making transfer pad Certification:
ISO9001: HK05/01358
SGS:GZ0606100461/CHEM
RoHS:BTRS091718751
Patent:ZL200520001597.8
Need any help on silicone rubber, please feel free to contact Ms Lily:
Tel:86-755-89212369
Mob/Whatsapp:86-18938867593
E-mail: hyxe(at)szrl(dot)net
Skype:happynancy417
