Infrared & Timer Remote for Multiple DSLR with Remote Interface and IR Receiver

The JJC MT-636 Multi-Exposure Timer & Infrared Remote is a remote switch inbuilt self-timer, interval timer, multi-long exposure timer, and exposure-count setting features. What’s more, this remote has inbuilt infrared code for CANON, NIKON, SONY, OLYMPUS, PENTAX, SAMSUNG cameras. It can trigger the camera either wired or wirelessly. So it is a good way to prevent camera shake, this is perfect for taking long exposure photos. The timer can be set anywhere from 1 second to 99 hours, 59 minutes, 59 seconds. A dial enables you easily enter the numeric settings with a single thumb. The LCD panel can also be illuminated. All these features make it good for time-lapse photography.
Features
Delay Timer: 99 hours, 59minutes, 59seconds
Interval Timer: 99 hours, 59minutes, 59seconds
Exposure Counter: 999 shoots or unlimited
Multi-Exposure Timer: up to 9 different exposure timer groups
Inbuilt infrared code for CANON, NIKON, SONY, OLYMPUS, PENTAX, SAMSUNG cameras

Specification

Timer Functions
You can set the timer delays, multi-exposure times, and intervals up to 99 hours, 59 minutes, 59 seconds in one second increments.
Exposure Function
MT-636 enables you to select anywhere from one to 999 continuous shots, or you can set the device to take an unlimited number of photos.
Multi Exposure Timer
MT-636 enables you to set up to 9 different exposures time in one setting, let you can easy find out which is your best exposure time for your shooting.
LCD Display
The backlit LCD display panel gives you a visual reference so you can enable the following functions: self-timer, exposure, interval, and number of shots. It also act as a status indicator for battery life, timer functions, lock indicator, number of shots, and more.
Audible Beep
MT-636 will give you an audible beep for the last three seconds of a countdown delay or interval. It will also beep to confirm your settings. The beep can be turned off if necessary.
Long Battery Life
Powered by two "AAA" batteries, it can last for about 2 months.
Inbuilt infrared code
For CANON, NIKON, SONY, OLYMPUS, PENTAX, SAMSUNG cameras

Since our MT-636 does not provide a shutter release cable, you will need to to purchase a JJC cable to fit your camera. If you have two cameras or above, you will just need to purchase different cables to use them with our MT-636 and your cameras, thus saving the cost after purchasing our MT-636.

Cable-A replaces CANON RS-80N3 / TC-80N3
Cable-B replaces NIKON MC-30 / MC-36 / MC-36A
Cable-C replaces CANON RS-60E3 / PENTAX CS-205
Cable-D replaces PANASONIC DMW-RSL1
Cable-E replaces OLYMPUS RM-CB1
Cable-F replaces MINOLTA RC-1000S/L / RM-S1AM / RM-S1LM
Cable-G replaces NIKON MC-DC1
Cable-M replaces NIKON MC-DC2
Cable-J replaces OLYMPUS RM-UC1
Cable-H replaces SIGMA CR-11
Cable-I replaces SIGMA CR-21
Cable-K replaces FUJIFILM RR-80
Cable-N replaces SAMSUNG ED-SR2NX02
Cable-O replaces FUJIFILM RR-80A
Cable-R replaces FUJIFILM RR-90