Compressed Non-asbestos Jointing Sheet
Quick Detail
- Place of Origin:China(Mainland)
- Minimum order:1
Specifications
Compressed Non-asbestos Jointing Sheet
*Material composition
Made from Aramid fibre, mineral fibre & inorganic fillers bonded with NBR.
*Specifications
1.100% Non-asbestos
2.Wide range of temperature
3.Good abrasion resistance, ageing resistance
4. Excellent air sealability
5.Oil, heat, acid alkali resistant
6.Good flexility
7.Gasket Material produced by ourselves
| Model | FRQ-350 | ||
| Description | Made from Aramid fiber, mineral fiber & inorganic fillers bonded with Synthetic NBR | ||
| Application | Suitable for oil resistant gasket material for medium loading, good resistance to water gases, oils and fuels, recommend used in the auto,engine and motorcycle application | ||
| Properties | Test Method | Unit | Data range |
| Density | - | g/cm3 | 1.65±0.1 |
| Max short term temperature | °C | 450 | |
| Max continuous operating temperature | °C | 250 | |
| Tensile Strength (across) | ASTM F152 | N/mm2 | ≥12 |
| Compressibility | ASTM F36J | % | 12±5 |
| Recovery | ASTM F36J | % | ≥50 |
| Creep Relaxation |
ASTM F38
16h @175°C |
% | ≤30 |
| Ignition loss | DIN 52911 | % | ≤30 |
| Sealability(Nitrogen) | DIN3535 | Cm3/min | ≤1.0 |
| ASTM3# oil 5h@150°C | Tensile strength(across) | Mpa | ≥8 |
| Thickness increase | % | ≤10 | |
| Weight increase | % | ≤15 | |
| ASTM Fuel B 5h@RT | Tensile strength(across) | Mpa | ≥6 |
| Thickness increase | % | ≤10 | |
| Weight increase | % | ≤15 | |
| Dimension | mm | 1500×1500 | |
| Thickness | mm | 0.5,0.8,1.0,1.5,2.0, |