certificate: | iso9001 |
Brand Name: | cyhj&chuanyinghejin |
Place of Origin: | China (Mainland) |
Material: | Metal |
Style: | Mechanical Seal |
Tungsten carbide is the basical material among the frictional materials. And the rings are widely adopted in industry.
Nylon Insulated Ring Terminals Maximum electrical rating of insulated ring terminal: 600volts Maximum temperature of insulated ring: 75℃ Terminal Body of insulated ring type lugs : The terminal body of ring type insulated cable lugs is made of Brass or Copper Plating of ring ...
One type of shaft seal for slurry pumps is mechanical seals, but mechanical seals are divided into cartridge mechanical seals and non-cartridge mechanical seals. Today we will talk about the differences between these two types of machinery. Cartridge mechanical seals combine ...
ZJ series slurry pump seal failure can be divided into initial type, wear type or random type. Statistically speaking, random failure, also called accidental failure, is the main type. Initial failures are usually caused by incorrect seal selection, installation or startup, and ...
Y-shaped sealing rings are widely used in reciprocating sealing devices, and their service life is longer than that of O-shaped sealing rings. The applicable working pressure of the Y-shaped sealing ring is not greater than 40MPa, and the working temperature is -30~80℃; ...
What is a Y-type sealing ring and what is its function? Today Shijiazhuang slurry pump manufacturer will introduce it to you. The Y-shaped sealing ring has a Y-shaped cross-section and is a typical lip sealing ring. Because its service life and sealing performance are higher ...
The O-type sealing ring is a rubber sealing ring with a circular cross-section. Because its cross-section is O-shaped, it is called an O-type rubber sealing ring, also called an O-ring. It began to appear in the mid-19th century, when it was used as a sealing element for steam ...
The O-ring is an extrusion seal. The basic working principle of the extrusion seal is to rely on the elastic deformation of the seal to cause contact pressure on the sealing contact surface. If the contact pressure is greater than the internal pressure of the sealed medium, ...
The O-rings of horizontal slurry pumps can be divided into static seals, reciprocating seals, rotating seals and switch seals according to the relative movement state between the seal and the sealed device. According to the compression amount (tightness) of the O-ring ...
Although the O-ring for sealing the slurry pump is a very small accessory in the entire assembly of the slurry pump, its role is irreplaceable. Today we will talk about its characteristics. As for the O-ring used for reciprocating motion, its motion friction resistance is ...
GHS-01 Gradient Heat Seal Tester Application A Gradient Heat Seal Tester is an indispensable device within the packaging industry, specifically designed to assess the heat-sealing properties of a wide array of materials. These materials include films, laminates, and various ...