Delivery Time: | 3month |
Package: | The standard paper box packing adds the tray |
Supply Ability: | 2000 Set/Sets per Year |
Minimum Order Quantity: | 50 Set/Sets |
Payment Terms: | L/C,D/P,T/T |
Model Number: | 1/2"~28"-150lb~900LB |
Place of Origin: | Sichuan China (Mainland) |
Media: | Oil |
Temperature of Media: | Normal Temperature |
Material: | Casting |
Power: | Manual |
Pressure: | Medium Pressure |
Standard or Nonstandard: | Standard |
1.Global valves which are maunfactured in conformity to BS 1873 and API 600 are featured with outside screw &yoke,bolted bonned,rising stem.The well-designed bonned construction enjioys good backseat seal. 2.Lubricant can be applied to the stem,which makes it free from replacing the backseat seal.Lubricant can be applied to the stem, witch makes it free from replacing the packings. This wedge Global valve along with its flexible wedge is to give positive and reliable shut-off at lower stem toque even under conditions of thermal cycling or pipe stres.The body %Bonnet materrials used conform to that of ASTM specifications and are applicable for meeting the extreme and severe opreation conditions.Seat rings to be weled tothe body are of hard faced deposited in Stellite,Ni-based or High Cr.Alloy,which are of good wear and corrosion-resistant as well as good for working at high and low temperature condition.3.Pakings available both in PTFE and graphite will meet hygienic and environmental requirement.
The major services are mechanical workout, model forging, model stamping and so on.
Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing them to withstand higher pressures than Class 150 valves. They are commonly used in industries such as oil and gas, petrochemical, power generation, and refining. Class 300 valves ...
Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000 pressure-rated ball valve that is small and light. It works best in applications where the temperature range is between -20°F (-29°C) and 450°F (232°C). What Is The Typical Operating ...
Class 2500 valves can be used for both on-off and throttling applications. The specific valve type and design will determine their suitability for a particular application. Gate valves class 2500 are often preferred for on-off service, while globe valves class 2500 or class ...
globe valve class 150 is a pressure rating designation defined by standards organizations, such as the American National Standards Institute (ANSI) and the American Society of Mechanical Engineers (ASME). It indicates the maximum pressure that a valve can withstand under normal ...
A class 1500 valve made of 316 stainless steel, for instance, can sustain 248 bar of pressure at 25 ºC, but only 166 bar at 250 ºC. However, in Carbon Steel A105, it can work up to 255 bar at 25ºC and only 209 bar at 250ºC. What Are The Key Features Of Class 1500 Valves? ...
Class 125 valve is a pressure rating designation defined by standards organizations, such as the American National Standards Institute (ANSI) and the American Society of Mechanical Engineers (ASME). It indicates the maximum pressure that a valve can withstand under normal ...
Swing Check Valve is a commonly used valve type, usually used to prevent the reverse direction of liquid flow. Its structure is simple. The check valve 8 is composed of a valve cover and a valve body, and there is a valve in the valve body, and the liquid flow is controlled by ...
Check Valve 50mm is a butterfly check valve connected to the pipeline, which can prevent the backflow of the medium and the change of the pipeline pressure. The 50mm brass non return valve is light, compact, and easy to install, and is suitable for flow control of liquid, gas, ...
Because the push to connect flanged bronze ball valve is designed and manufactured with a push rod connection, push ball valve is ideal for service and maintenance work in tight spaces. Install push button ball valve on wet pipelines quickly to stop the flow of water. There are ...
The main features of the press ball valve are its compact structure, reliable sealing, simple structure and convenient maintenance. The sealing surface and the spherical surface are often in a closed state, which is not easy to be eroded by the medium. This OEM ball valve is ...