Nitronic 60/S21800/Alloy 218 authentic stainless steel
Description
| Nitronic 60,S21800,Alloy 218,ME Code Case 1817,ASTM A193 ,ASTM A194 (grade 8S) ASTM A276,ASTM A479 ,Forging,Disk,Ring,Axle,Cylin |
Product Details
Our prodcts could be provided in various forms, including Forging,Disk,Ring,Axle,Cylinder,Flange,Ingot,Billet,Square,Bar,Strip,Plate&Sheet,Pipe&Tube,ect.
Infrastructure bridge pin and hanger expansion joints, parking deck expansion joint wear plates; Hydroelectric Power stems, wicket gate wear rings; Oil and Gas Production pump wear rings, bushings, valve trim, seals, fittings, logging equipment and screens;Food processing and Pharmaceuticals galling resistant applications in sanitary equipment where lubricants can not be used;Chemical and Petrochemical process valve stems, seats and trim, pump wear rings.
The general corrosion resistance of Nitronic 60 falls between 304 and 316. However, in a wear system, a galling or seizure failure occurs first followed by dimensional loss due to wear and finally corrosion. Although the general corrosion resistance of Nitronic 60 is not as good as 316, it does offer better chloride pitting, stress corrosion cracking and crevice corrosion resistance.In high temperature service, Nitronic 60 exhibits carburization superior to 316L and 309. Its oxidation resistance is far superior to 304 and 316 and comparable to 309.
Due to its grain structure, the galling resistance of Nitronic 60 is superior to that of any other stainless steel. It resists wear, tearing or freeze up of both the primary and contact materials
over a wide range of service temperatures. The elevated temperature wear resistance of Nitronic 60 is excellent despite its relatively low hardness when compared with cobalt and nickel-base wear
alloys. It also performs well in metal-to-metal wear in nominally inert atmospheres. The cavitation erosion resistance of Nitronic 60 is superior to the austenitic stainless steels as well as high
strength duplex (ferritic-austenitic) stainless steels.
Nitronic 60,S21800,Alloy 218,ME Code Case 1817,ASTM A193 ,ASTM A194 (grade 8S) ASTM A276,ASTM A479