CNC ultra-high pressure water jet cutting machine with two cutting heads
Description
| Delivery Time: | 60 days after receipt of deposit. |
| Package: | soft packing |
| Supply Ability: | 30 Set/Sets per Month |
| Minimum Order Quantity: | 1 Set/Sets |
| Payment Terms: | L/C,T/T |
| Port: | Dalian |
| Automatic Grade: | Automatic |
| Processing Types: | Metal |
| Precision: | High Precision |
| Controlling Mode: | CNC |
| Usage: | General |
| Processing: | Other |
| Brand Name: | APW |
| Place of Origin: | Liaoning China (Mainland) |
Product Details
If convey high pressure water into the nozzle directly, the pressure will be unstable. And the pressure will fluctuate periodically. To keep stable high pressure water, one attenuator will be fitted between intensifier and nozzle. Meanwhile one mini oil pump is added to keep water pressure more stable. So that the energy loss is limited within 5% normally.
The intensifier assembly, with a plunger on each side of the piston, generates pressure in both directions. As one side of the intensifier is in the inlet stroke, the opposite side is generating ultra-high pressure output. During the plunger inlet stroke, filtered water enters the high pressure cylinder through the check valve assembly. After the plunger reverses direction, the water is compressed and exits as ultra-high pressure water and then enters the pressure vessel(accumulator) The accumulator smoothes pressure fluctuations from the intensifier and delivers a constant and steady stream of ultra-high pressure water to the cutting tool.
The intensifier acts as an amplifier as it converts the energy from the low pressure hydraulic fluid into ultra-high pressure water. The hydraulic system provides fluid power to a reciprocating piston in the intensifier center section. A limit switch, located at each end of the piston travel, signals the electronic controls to shift the directional control valve and reverse the piston direction.
How does Waterjet work?
(5) Lower cost of cutting, easier operation, less operators and lodge place.
(4) There are limit switches of X1-axis positive direction and X2-axis negative direction installed in the proper position of Z1-axis and Z2-axis connect box, which can make sure the safety of single axis or double axes processing.
(3) This machine can cut either big part or small part, especially to the ones with same shape. The two cutting heads working together will increase the efficiency highly.
(2) One IPC is able to control one head to work, and also two heads together. With the KMT pump, the function of two cutting machines has been performed.
(1) We add one X-axis and one Z-axis on the same aluminum beam of common bridge style waterjet cutting machine, which will work as two machines.
Instruction of water jet cutting machine with two cutting heads
Water jet cutting with two cutting heads.
Double drive motors control.
Double Z-axis cutting.
Make cutting more efficiency
- Workpiece and Weight:Instrument Machine Tool
- Automatic Grade:Automatic
- Processing Types:Metal
- Precision:High Precision
- Controlling Mode:CNC
- Usage:General
- Processing:Other
- Brand Name:APW
- Place of Origin:Liaoning China (Mainland)
You may also like
Relate products of CNC ultra-high pressure water jet cutting machine with two cutting heads
Control accuracy:0.01mm Z-axis step motor:8.5Kg.cm Y-axis servo motor:0.75KW,1.0KW,1.5KW X-axis servo motor:0.75 KW Power requirement:AC220V 50/60HZ Workpiece and Weight:Large Machine Tool Automatic Grade:Automatic Processing Types:Other Precision:High Precision Controlling ...
Control accuracy:0.01mm Z-axis step motor:8.5Kg.cm Y-axis servo motor:0.75KW,1.0KW,1.5KW X-axis servo motor:0.75 KW Power requirement:AC220V 50/60HZ Workpiece and Weight:Large Machine Tool Automatic Grade:Automatic Processing Types:Other Precision:High Precision Controlling ...