Application: | Profile |
Place of Origin: | Shandong China (Mainland) |
80mm
0.4~0.6MPa
0.5*0.1m
0.1~1m/min
40KN
9kw
3~9kw
4.1kw
BLG-5011
80mm
0.4~0.6MPa
0.18*0.11m
0.1~1m/min
40KN
9kw
3~9kw
4.1kw
BLG-1811
Mould height regulation
Air pressure
Traction section
Traction speed
Traction force
Oven power
Heating power
Motor power
Model
6. The main electricity components are imported, they have high sensitivity and low failure rate;
5. The whole open-shut model traction frame can effectively assure the traction force and the products with the same direction and it is convenience to adjust;
4. The chain guide rail is UHMWPE, and the rail had strong wearability, it can prevent the products from polluting.
3. The efficiency press length is 4m, it is suitable for the producing of hollow profile with thin-wall;
2. Special design of the mould support, it can realize the three-dimensional adjust during the producing course;
1. The machine is designed according to the small section hollow profile, it had the features of steadily to operate and marked energy saving effect.
Equipment characteristic:
The machine is designed according to the small section hollow profile such as small pipes, tubes and etc.
Application:Profile Place of Origin:Shandong China (Mainland) The machine is designed according to the big section profile such as cable trays, electrician ladders and pultruded gratings. ...
Application:Pipe This line is used to produce FRP rebar with different specification. ...