Graphtec CE8000 serie Cutting plotter

Layoutinstructions are sent together with the cutting data for designsprinted using layout functions such as set in a RIP, enablingcontinuous detection of registration marks for cutting. This feature isvaluable when high accuracy is needed for cutting an array of copies.

Theintermediate registration marks in the media feed direction aredetected to allow four-point correction for each individual segmentarea. This enables high-precision positioning of the whole area ofskewed prints produced using long-length printing.

Four-pointregistration mark sensing and X/Y-axis correction uses high-precisionpositioning to ensure accurate cutting of graphics that have beendistorted during the printing and laminating process.

*Various combination of colors may not be able to read.

Bymemorizing the sensor's pre-read numbers on media and registrationmark, ARMS4.0 can now read registration marks in colored background.(some contrast is necessary for ARMS4.0 to read)

Save two user settings with 8 condition settings for each user.

*1:Using CB15UA, Reinforcement of media backing by PVC film for prevention of media skew.
*2:There is a limitation for maximum thickness of media for cutting.

You can easily cutout the jobs such as stickers.

Using the perforation cut function, cutout of the media is possible.

Perforation cut and half cut

*Excluding the 60 and 75 size. For the both ends of the 100, 130 and 160 size, the pressure position is selectable from 2 steps.

Push roller pressure is changeable in 3 steps.
Setting of suitable pressure to match the medias is possible.

3 step push roller pressure

New Operation Panel

3inch LCD display with interactive operation and icon menu enableseasy-to-use key operation. Further more, plotter conditions aredisplayed by icons, so the setting conditions can be checked withoutkey operations.

Wide range of cutting areas.
Up to 24, 30, 42, 54 and 64 width media can be cut by each size of models.

Reliable long-length tracking capability.
The 3 step push roller provides a more stable long length cutting for15m (50feet) tracking guarantee for cutting wider range of materials.
*When Using with Graphtec specified media and cutting condition.

Fastest cutting speed in its class.
1485mm/s maximum cutting speed for the highest productivity.

Highest cutting force in its class.
600gf maximum cutting force for cutting wider range of materials.

Cutting Plotter Controller Software enables remote control via a Pc. 3 inch LCD display with interactive operation panel.
ARMS4.0, Advanced Registration Mark Sensing system for improved handling.

The series come in cutting width of 24, 30, 42, 54 and 64 to fit your requirements.
*When Using with Graphtec specified media and cutting condition.

Strongerinternal structure for improved media handling. The Optional flangeset, new designed media basket and 3 different pressure push rollersprovides more control on long length cutting for guaranteed 50 feettracking.

1485mm/s maximum cutting speed for the higher productivity.

600gf maximum cutting force for cutting wider variety of materials.